• 100% Para-Aramid Liner.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 1 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 2 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)

• EN ISO 11612: 2015
• A1 - Limited Flame Spread (Method A)
• F2 - Contact Heat (250C for between 10 to 15 Seconds)

• 100% Para-Aramid Liner.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 1 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 2 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)

• EN ISO 11612: 2015
• A1 - Limited Flame Spread (Method A)
• F2 - Contact Heat (250C for between 10 to 15 Seconds)

• 100% Para-Aramid Liner.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 1 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 2 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)

• EN ISO 11612: 2015
• A1 - Limited Flame Spread (Method A)
• F2 - Contact Heat (250C for between 10 to 15 Seconds)

• 13 Gauge, HPPE, Polyester, Glass Fibre Green Liner.
• 100% Sandy Nitrile Coating
• 100% TPR Back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 3 - Puncture Resistance
• Level C - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection

• 13 Gauge Liner.
• 20% UHMW PE+ 80% rubber
• 100% TPE Fully Injection coating.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 2 - Puncture Resistance
• Level C - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection

• 13 Gauge Liner.
• 20% UHMW PE+ 80% rubber
• 100% TPE Fully Injection coating.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 2 - Puncture Resistance
• Level D - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection

• 13 Gauge, HPPE, Polyester, Glass Fibre Orange Liner.
• 100% Sandy Nitrile Coating
• 100% TPR Back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 3 - Puncture Resistance
• Level C - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection

• 13 Gauge, HPPE, Polyester, Glass Fibre Green Liner.
• 100% Foam Nitrile Coating
• 100% TPR Back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection

• 13 Gauge Orange Liner.
• 45% UHMW PE + 30% nitrile + 25% rubber
• 100% Foam Nitrile Coating
• 100% TPR Back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.


• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection

• 13 Gauge, HPPE, Polyester, Glass Fibre Liner (Available in Green, Orange, Pink, Blue, and Red).
• 100% Foam Nitrile Coating
• 100% TPR Glow in the Dark Back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection

• 13 Gauge, HPPE, Polyester, Glass Fibre Liner (Available in Green, Orange, Pink, Blue, and Red).
• 100% Foam Nitrile Coating
• 100% TPR Glow in the Dark Back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection

• 13 Gauge, HPPE, Polyester, Glass Fibre Liner (Available in Green, Orange, Pink, Blue, and Red).
• 100% Foam Nitrile Coating
• 100% TPR Glow in the Dark Back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection

• 13 Gauge, HPPE, Polyester, Glass Fibre Liner (Available in Green, Orange, Pink, Blue, and Red).
• 100% Foam Nitrile Coating
• 100% TPR Glow in the Dark Back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection
)

• 13 Gauge, HPPE, Polyester, Glass Fibre Liner (Available in Green, Orange, Pink, Blue, and Red).
• 100% Foam Nitrile Coating
• 100% TPR Glow in the Dark Back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection
)

The 3M Peltor X3 Ear Defenders are designed to offer protection against high noise levels. For example, forestry or heavy engineering.

The 3M Peltor X3 utilises a newly designed spacer to help improve attenuation without the need for a double cup design, thus increasing the space inside the cup for greater comfort and wearability.
• High attenuation from a single cup design
• Light-weight and slim compared with similarly attenuating products.
• Simple colour coding: red indicating high attenuation.

EN 352:2020 SNR 32

• 100% Nylon seamless shell.
• Nitrile coated palm and fingers.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications

• EN388: 2016
• Level 3 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance

FEATURES
• Outperforms polypropylene (plastic) wet wipes
• Super absorbent with high lift on grime
• Oeko-tex 100 certified with no harmful substances
• 100% biodegradable and from sustainable plant sources
• Cosmetic approved, with zero recorded irritation on all skin types
• Antibacterial, kills 99.99% of most known germs

APPLICATIONS
• Use on hands, tools, machinery and most surfaces • Mobile workers, construction trade, engineering
Removes the following and more:

• Fast removal of Semi-cured silicone sealant and decorators caulk
• Oils and greases
• Adhesives
• Water-based paints
• Inks
• Dirt and grime

FEATURES
• Outperforms polypropylene (plastic) wet wipes
• Super absorbent with high lift on grime
• Oeko-tex 100 certified with no harmful substances
• 100% biodegradable and from sustainable plant sources
• Cosmetic approved, with zero recorded irritation on all skin types
• Antibacterial, kills 99.99% of most known germs

APPLICATIONS
• Use on hands, tools, machinery and most surfaces • Mobile workers, construction trade, engineering
Removes the following and more:

• Fast removal of Semi-cured silicone sealant and decorators caulk
• Oils and greases
• Adhesives
• Water-based paints
• Inks
• Dirt and grime

• Hooded coverall
• Lightweight and durable (<700g)
• Adhesive chin flap
• Elasticated face, wrist and ankles
• Thumb loops
• Double cuffs, zippers and zip flaps
• Stitched and over seams
• Good barrier against organic and inorganic chemicals
• Suitable for oil and gas industry, chemical engineering, response teams and many other applications
• Conforms to: CAT III, Type 3B, 4B, 5B, 6B, EN 1073-2, EN 1149-5, EN14126

• Concealed zip closure with press studs fastening
• 2 chest pockets complete with flap and press stud closure
• Gas detection loops for positioning of antennas, cables and detector
• Elastic waist
• 2 Side pockets with press stud closure
• Back pocket complete with flap and press stud closure
• Backpleat for free movement
• Thigh pocket with flap and press stud closure
• Ruler pocket
• Adjustable cuffs and leg opening with press stud closure
• Main seams triple stitched
• Reflective striping
• 80% Cotton, 19% Polyester, 1% Antistatic fibre,260 gsm Twill
• Conforms to the following standards:
• EN ISO 13688:2013 Protective clothing general requirements
• EN ISO 11612:2010 (A1 B1 C1 F1) Protection against heat and flame
• EN ISO 11611:2008 Class 1 Protective clothing for use in welding
• EN 13034:2005+A1:2009 Chemical protective clothing (type 6)
• EN 1149-5:2008 Anti Static material performance and design requirements
• EN 61482-1-2:2008 (Class 1=4kA)- Box arc testing

• Concealed zip closure with press studs fastening
• 2 chest pockets complete with flap and press stud closure
• Gas detection loops for positioning of antennas, cables and detector
• Elastic waist
• 2 Side pockets with press stud closure
• Back pocket complete with flap and press stud closure
• Backpleat for free movement
• Thigh pocket with flap and press stud closure
• Ruler pocket
• Adjustable cuffs and leg opening with press stud closure
• Main seams triple stitched
• Reflective striping
• 80% Cotton, 19% Polyester, 1% Antistatic fibre,260 gsm Twill
• Conforms to the following standards:
• EN ISO 13688:2013 Protective clothing general requirements
• EN ISO 11612:2010 (A1 B1 C1 F1) Protection against heat and flame
• EN ISO 11611:2008 Class 1 Protective clothing for use in welding
• EN 13034:2005+A1:2009 Chemical protective clothing (type 6)
• EN 1149-5:2008 Anti Static material performance and design requirements
• EN 61482-1-2:2008 (Class 1=4kA)- Box arc testing

• Concealed front press stud closure
• 2 chest pockets
• 2 side pockets
• Gas detection loop
• Adjustable cuffs using press stud closure
• Nordic design reflective tape
• Flame retardant and Anti-static
• Chief Value Cotton (CVC)
• 80% cotton, 19% Polyester, 1% Antistatic fibre. 320 gsm Satin weave

• Conforms to the following standards:
• EN ISO 13688:2013 Protective clothing general requirements
• EN ISO 11612:2015 (A1 B1 C1 E3) Protection against heat and flame
• EN ISO 11611:2015 Class 2 A1 Protective clothing for use in welding
• EN ISO 14116:2015 (Index 3)
• EN 13034:2005+A1:2009 Chemical protective clothing (type 6)
• EN 1149-5:2018 Anti Static material performance and design requirements
• EN 61482-1-2:2007 (Class 1=4kA) Box arc testing

• Concealed front press stud closure
• 2 chest pockets
• 2 side pockets
• Gas detection loop
• Adjustable cuffs using press stud closure
• Nordic design reflective tape
• Flame retardant and Anti-static
• Chief Value Cotton (CVC)
• 80% cotton, 19% Polyester, 1% Antistatic fibre. 320 gsm Satin weave

• Conforms to the following standards:
• EN ISO 13688:2013 Protective clothing general requirements
• EN ISO 11612:2015 (A1 B1 C1 E3) Protection against heat and flame
• EN ISO 11611:2015 Class 2 A1 Protective clothing for use in welding
• EN ISO 14116:2015 (Index 3)
• EN 13034:2005+A1:2009 Chemical protective clothing (type 6)
• EN 1149-5:2018 Anti Static material performance and design requirements
• EN 61482-1-2:2007 (Class 1=4kA) Box arc testing

• Adjustable elasticated waist
• Side pockets
• Back pocket with press stud closure
• Thigh pocket with press stud closure
• Knee pad pockets
• Nordic design reflective tape
• Chief Value Cotton (CVC)
• 80% cotton, 19% Polyester, 1% Antistatic fibre. 320 gsm Satin weave

• Conforms to the following standards:
• EN ISO 13688:2013 Protective clothing general requirements
• EN ISO 11612:2015 (A1 B1 C1 E3) Protection against heat and flame
• EN ISO 11611:2015 Class 2 A1 Protective clothing for use in welding
• EN ISO 14116:2015 (Index 3)
• EN 13034:2005+A1:2009 Chemical protective clothing (type 6)
• EN 1149-5:2018 Anti Static material performance and design requirements
• EN 61482-1-2:2007 (Class 1=4kA) Box arc testing