• Concealed zip front with double storm flap cover and press stud closure
• Hood in collar with draw cord
• Hood with innovative fixture for improved hearing through hood
• Napoleon pocket
• Inner pocket
• 2 front pockets with flap
• 2 side pockets
• Adjustable cuffs using hook and loop fastening
• Flame retardant and anti-static
• Used in combination with the Weesp, FR AS quilted lining HYD060350 and Miami trouser HYD073600
• Multi Simply no Sweat (SNS) 260gsm Polyester 99% / 1% Anti-static
• 100% FR Cotton lining
• Highly breathable providing great comfort
• Durable and cost effective
• Smooth textile finish
• Conforms to the following standards:
• EN1149-5:2008 Anti Static- Material Performance and design requirement
• EN ISO 14116:2008 Protection against limited spread
• Outer material Index 1/12H/60
• Inner material Index 3/5H/60
• EN ISO 20471:2013 Class 3 High visibility
• EN343:2003 + A1:2007 Class 3:3 Protection against rain
• EN 13034:2005+A1:2009 Protection against liquid chemicals (Type 6)
• EN ISO 13688:2013 General requirements for protective clothing
• Concealed zip front with double storm flap cover and press stud closure
• Hood in collar with draw cord
• Hood with innovative fixture for improved hearing through hood
• 2 chest pockets with flap
• Napoleon pocket
• Inner pocket
• 2 side pockets with flap
• Adjustable extended back using hook and loop fastening
• Used in combination with the Weesp, FR AS quilted lining HYD060350 and Miami trouser HYD073600
• Flame retardant and anti-static
• Multi Simply no Sweat (SNS) 260gsm Polyester 99% / 1% Anti-static
• 100% FR Cotton lining
• Highly breathable providing great comfort
• Durable and cost effective
• Smooth textile finish
• Conforms to the following standards:
• EN1149-5:2008 Anti Static- Material Performance and design requirement
• EN ISO 14116:2008 Protection against limited spread
• Outer material Index 1/12H/60
• Inner material Index 3/5H/60
• EN ISO 20471:2013 Class 3 High visibility
• EN343:2003 + A1:2007 Class 3:3 Protection against rain
• EN 13034:2005+A1:2009 Protection against liquid chemicals (Type 6)
• EN ISO 13688:2013 General requirements for protective clothing
• Concealed zip front with double storm flap cover and press stud closure
• Hood in collar with draw cord
• Hood with innovative fixture for improved hearing through hood
• 2 chest pockets with flap
• Napoleon pocket
• Inner pocket
• 2 side pockets with flap
• Adjustable extended back using hook and loop fastening
• Used in combination with the Weesp, FR AS quilted lining HYD060350 and Miami trouser HYD073600
• Flame retardant and anti-static
• Multi Simply no Sweat (SNS) 260gsm Polyester 99% / 1% Anti-static
• 100% FR Cotton lining
• Highly breathable providing great comfort
• Durable and cost effective
• Smooth textile finish
• Conforms to the following standards:
• EN1149-5:2008 Anti Static- Material Performance and design requirement
• EN ISO 14116:2008 Protection against limited spread
• Outer material Index 1/12H/60
• Inner material Index 3/5H/60
• EN ISO 20471:2013 Class 3 High visibility
• EN343:2003 + A1:2007 Class 3:3 Protection against rain
• EN 13034:2005+A1:2009 Protection against liquid chemicals (Type 6)
• EN ISO 13688:2013 General requirements for protective clothing
• Elasticated waist with draw cords
• Side pockets with hook and loop closure
• Adjustable Leg opening with hook and loop closure
• Thigh pocket with flap
• Tool loop
• Leg opening zipper with flap cover
• Used in combination with the Weesp, FR AS quilted lining HYD060350 and Multi SNS Jackets
• Flame retardant and anti-static
• Multi Simply no Sweat (SNS) 260gsm Polyester 99% / 1% Anti-static
• 100% FR Cotton lining
• Highly breathable providing great comfort
• Durable and cost effective
• Smooth textile finish
• Conforms to the following standards:
• EN1149-5:2008 Anti Static- Material Performance and design requirement
• EN ISO 14116:2008 Protection against limited spread
Outer material Index 1/12H/60
Inner material Index 3/5H/60
• EN ISO 20471:2013 Class 1 High visibility
• EN343:2003 + A1:2007 Class 3:3 Protection against rain
• EN 13034:2005+A1:2009 Protection against liquid chemicals (Type 6)
• EN ISO 13688:2013 General requirements for protective clothing
• Elasticated waist with draw cords
• Side pockets with hook and loop closure
• Adjustable Leg opening with hook and loop closure
• Thigh pocket with flap
• Tool loop
• Leg opening zipper with flap cover
• Used in combination with the Weesp, FR AS quilted lining HYD060350 and Multi SNS Jackets
• Flame retardant and anti-static
• Multi Simply no Sweat (SNS) 260gsm Polyester 99% / 1% Anti-static
• 100% FR Cotton lining
• Highly breathable providing great comfort
• Durable and cost effective
• Smooth textile finish
• Conforms to the following standards:
• EN1149-5:2008 Anti Static- Material Performance and design requirement
• EN ISO 14116:2008 Protection against limited spread
Outer material Index 1/12H/60
Inner material Index 3/5H/60
• EN ISO 20471:2013 Class 1 High visibility
• EN343:2003 + A1:2007 Class 3:3 Protection against rain
• EN 13034:2005+A1:2009 Protection against liquid chemicals (Type 6)
• EN ISO 13688:2013 General requirements for protective clothing
• Concealed zip front with double storm flap cover and press stud closure
• Hood in collar with draw cords
• Hood with innovative fixture for improved hearing through hood
• 2 chest pockets with flap
• Fixed ID pocket on a band
• Napoleon pocket
• Inner pocket
• 2 front pockets with flap
• Adjustable cuffs using hook and loop fastening
• Used in combination with the Weert, quilted lining HYD040350
• Glow in the Dark (GID) tape for improved visibility in low lighting environments
• GID tape is an enhancement to the garment and not an intrinsic part of EN ISO 20471
• Approximately 8 hours of glow once charged for 5-10 minutes dependent on light source
• No batteries required
• 220 gsm Ripstop Polyester laminate fabric
• Conforms to EN ISO 20471:2013 Class 3 High Visibility
• Conforms to EN343:2003+A1:2007 Class 3:3
• Conforms to EN ISO 13688:2013 General requirements for protective clothing
• Concealed zip front with double storm flap cover and press stud closure
• Hood in collar with draw cords
• Hood with innovative fixture for improved hearing through hood
• 2 chest pockets with flap
• Fixed ID pocket on a band
• Napoleon pocket
• Inner pocket
• 2 front pockets with flap
• Adjustable cuffs using hook and loop fastening
• Used in combination with the Weert, quilted lining HYD040350
• Glow in the Dark (GID) tape for improved visibility in low lighting environments
• GID tape is an enhancement to the garment and not an intrinsic part of EN ISO 20471
• Approximately 8 hours of glow once charged for 5-10 minutes dependent on light source
• No batteries required
• 220 gsm PU coated Ripstop Polyester
• Conforms to EN ISO 20471:2013 Class 3 High Visibility
• Conforms to EN343:2003+A1:2007 Class 3:3
• Conforms to EN ISO 13688:2013 General requirements for protective clothing
• Concealed zip front with double storm flap cover and press stud closure
• Fixed quilted lining
• Fixed linings may diminish the breathability of a garment
• Hood in collar with draw cords
• Hood with innovative fixture for improved hearing through hood
• 2 chest pockets with flap
• Fixed ID pocket on a band
• Napoleon pocket
• Inner pocket
• 2 zip side pockets
• Adjustable cuffs using hook and loop fastening
• Adjustable extended back using hook and loop fastening
• Glow in the Dark (GID) tape for improved visibility in low lighting environments
• GID tape is an enhancement to the garment and not an intrinsic part of EN ISO 20471
• Approximately 8 hours of glow once charged for 5-10 minutes dependent on light source
• No batteries required
• 220 gsm Ripstop Polyester laminate fabric
• Conforms to EN ISO 20471:2013 Class 3 High Visibility
• Conforms to EN343:2003+A1:2007 Class 3:3
• Conforms to EN ISO 13688:2013 General requirements for protective clothing
• Concealed zip front with double storm flap cover and press stud closure
• Fixed quilted lining
• Fixed linings may diminish the breathability of a garment
• Hood in collar with draw cords
• Hood with innovative fixture for improved hearing through hood
• 2 chest pockets with flap
• Fixed ID pocket on a band
• Napoleon pocket
• Inner pocket
• 2 zip side pockets
• Adjustable cuffs using hook and loop fastening
• Adjustable extended back using hook and loop fastening
• Glow in the Dark (GID) tape for improved visibility in low lighting environments
• GID tape is an enhancement to the garment and not an intrinsic part of EN ISO 20471
• Approximately 8 hours of glow once charged for 5-10 minutes dependent on light source
• No batteries required
• 220 gsm PU coated Ripstop Polyester
• Conforms to EN ISO 20471:2013 Class 3 High Visibility
• Conforms to EN343:2003+A1:2007 Class 3:3
• Conforms to EN ISO 13688:2013 General requirements for protective clothing
• Adjustable elastic waist
• 2 Side pockets
• Thigh pocket with flap
• Double rule pocket
• 2 back pockets
• Knee pockets
• Good comfort and freedom of movement
• Can be used in combination with the Swing pocket set, Hessle HYD0410003
• Glow in the Dark (GID) tape for improved visibility in low lighting environments
• GID tape is an enhancement to the garment and not an intrinsic part of EN ISO 20471
• Approximately 8 hours of glow once charged for 5-10 minutes dependent on light source
• No batteries required
• 300 gsm
• 65% polyester/35% cotton in Non-Hi vis fabric
• 80% polyester/20% cotton in Hi-Vis fabric
• Conforms to EN ISO 20471:2013 Class 1 High Visibility
• Conforms to EN ISO 13688:2013 General requirements of protective clothing
• Adjustable elastic waist
• 2 Side pockets
• Thigh pocket with flap
• Double rule pocket
• 2 back pockets
• Knee pockets
• Good comfort and freedom of movement
• Can be used in combination with the Swing pocket set, Hessle HYD0410003
• Glow in the Dark (GID) tape for improved visibility in low lighting environments
• GID tape is an enhancement to the garment and not an intrinsic part of EN ISO 20471
• Approximately 8 hours of glow once charged for 5-10 minutes dependent on light source
• No batteries required
• 300 gsm
• 65% polyester/35% cotton in Non-Hi vis fabric
• 80% polyester/20% cotton in Hi-Vis fabric
• Conforms to EN ISO 20471:2013 Class 1 High Visibility
• Conforms to EN ISO 13688:2013 General requirements of protective clothing
• Zip front
• Horizontal zip fastening chest pocket
• Detachable sleeves
• Dual reflective piping on front and back
• 2 zip fastening side pockets
• Matching Kiel parka, HYD2602PA to be ordered separately
• Fleece 300 gsm 100% polyester
• Zip front
• Horizontal zip fastening chest pocket
• Detachable sleeves
• Dual reflective piping on front and back
• 2 zip fastening side pockets
• Matching Kiel parka, HYD2602PA to be ordered separately
• Fleece 300 gsm 100% polyester
• Zip front
• Horizontal zip fastening chest pocket
• Detachable sleeves
• Dual reflective piping on front and back
• 2 zip fastening side pockets
• Matching Kiel parka, HYD2602PA to be ordered separately
• Fleece 300 gsm 100% polyester
• Zip front
• Horizontal zip fastening chest pocket
• Detachable sleeves
• Dual reflective piping on front and back
• 2 zip fastening side pockets
• Matching Kiel parka, HYD2602PA to be ordered separately
• Fleece 300 gsm 100% polyester
Features
• Smart Fit with durable synthetic leather palm
• Thumb crotch support
• Embossed nylon neoprene wrist
• Stretchable spandex back hand fabric
Applications
• Multi-purpose
• Power Tool handling
• Maintenance and Repair
• Heavy Assembling
• Engineering Equipment Operations
• EN388:2003
• Level 3 - Abrasion
• Level 3 - Cut Resistance
• Level 3 - Tear Resistance
• Level 1 - Puncture
Features
• Durable black Meshed Fabric
• Synthetic leather Nails Pinch Protection with maximum dexterity
• Heavy Spandex fabric on Fourchettes
• Yellow piping on Knuckle lower line for durability
Applications
• Multi-Purpose
• Heavy Assembling
• Power Tool Handling
• Maintenance and Repair
• Box handling and Glass handling
• Engineering Equipment Operations
• Transportation
• Industrial Grip Work
EN388:2003
• Level 3 - Abrasion
• Level 1 - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
The V-TEC 1.8M Mini retractable lanyard is the most compact & lightweight self-retracting lanyard ever developed using multiple spring radial energy-absorbing technology. This new design eliminates the need for an external energy-absorber outside of the housing making it the smallest personal fall limiter on the market.
• Integral energy absorber
• Requires zero recalibration or adjustment
• The energy absorber is completely sealed from external contaminants
• A fully rotating attachment point for complete flexibility –both 360° and 180° providing a free range of motion
• Structurally reinforced pawl mechanism through precision engineering
• Highly durable polycarbonate case houses the SRL, and its transparency allows for easy visual inspection of critical internal components
• High quality components manufactured from high-grade stainless steel and engineered plastics
• Single Leg
• Aluminium rebar lightweight hook anchorage point
• 60-140KG including tool weight limit
• EN360:2002 Personal protective equipment against falls from a height. Retractable type fall arresters
The V-TEC PFL (Personal Fall Limiter) Retractable Lanyard is the most compact & lightweight self-retracting lanyard ever developed in its class using multiple spring radial energy-absorbing technology. This new design eliminates the need for an external energy-absorber outside of the housing making it the smallest personal fall limiter on the market.
Suitable for multiple applications, the 3 meter PFL is designed specifically for environments where close anchorage is available. The product offers fall arrest and restraint for users 60 to 140 kg including tools.
• Integral energy absorber
• Requires zero recalibration or adjustment
• The energy absorber is completely sealed from external contaminants
• A fully rotating attachment point for complete flexibility –both 360° and 180° providing a free range of motion
• Structurally reinforced pawl mechanism through precision engineering
• Highly durable polycarbonate case houses the SRL, and its transparency allows for easy visual inspection of critical internal components
• High quality components manufactured from high-grade stainless steel and engineered plastics
• Single Leg
• Aluminium rebar lightweight hook anchorage point
• Aluminium carabiner triple locking (TL) captive pin
• EN360:2002 Personal protective equipment against falls from a height. Retractable type fall arresters
With premium stainless steel components and innovative engineering, the V-TEC Self Retracting Lifeline incorporates a precision-made spring radial energy absorber that requires zero calibration or adjustment. The retraction dampening feature controls cable retraction speeds preventing pre-mature and accidental load indicator deployment.
The V-TEC™ 10M Cable SRL is intended to form a complete connecting element between the body support element and the anchor.
• The internal energy absorber ensures the forces passed to the user and anchorage are reduced to below 6 kN
• All internal components are manufactured from materials with inherently high corrosion resistant properties
• Retraction dampening device restricting ultimate lifeline retraction velocity if released whilst extracted
• The toughened case is designed to resist impact damage and protect internal components
• Weight range 60-140kg including tools
• EN360:2002 Personal protective equipment against falls from a height. Retractable type fall arresters
With premium stainless steel components and innovative engineering, the V-TEC Self Retracting Lifeline incorporates a precision-made spring radial energy absorber that requires zero calibration or adjustment. The retraction dampening feature controls cable retraction speeds preventing pre-mature and accidental load indicator deployment.
The V-TEC™ 15M Cable SRL is intended to form a complete connecting element between the body support element and the anchor.
• The internal energy absorber ensures the forces passed to the user and anchorage are reduced to below 6 kN
• All internal components are manufactured from materials with inherently high corrosion resistant properties
• Retraction dampening device restricting ultimate lifeline retraction velocity if released whilst extracted
• The toughened case is designed to resist impact damage and protect internal components
• Weight range 60-140kg including tools
• EN360:2002 Personal protective equipment against falls from a height. Retractable type fall arresters
-
93 Products
