• Disposable coverall
• 60G microporous fabric
• Laminated finish
• Light spray and limited splash protection
• 2 way zip front with flap
• Elasticated cuffs, ankles, waist and hood
• Fully taped seams
• Individually packaged
• CE Type 4,5 & 6
• Conforms to:
EN ISO 13688:2013+A1:2021
EN 14605:2005+A1:2009 (Type 4B)
EN ISO 13982-1:2004+A1:2010 (Type 5B)
EN 13034:2005+A1:2009 (Type 6B)
EN 1073-2:2002 (Class 1)
EN 14126:2003+AC:2004
Resistance to Penetration by contaminated liquids under hydrostatic pressure = Class 6
Resistance to Penetration by infective agents due to mechanical contact with substances containing contaminated liquids = Class 6
Resistance to penetration by contaminated liquid aerosols = Class 3
Resistance to penetration by contaminated solid particles = Class 3
EN 1149-5: 2018
EN 14325:2004
Microporous type 3/4/5/6 disposable coverall
• 90gm 56% SMS polypropylene, 44% polyethylene
• Polyethylene laminated +3 layers of polypropylene
• Ultrasonic taped seams
• Elasticated hood, wrists, ankles and waist
• Zip front with storm flap
• Elasticated thumb loops
Ideal uses:
• Maintenance & Repair
• Powder coating
• Insulation laying
• Pharmaceutical manufacture
• Paint spraying
• Wood & Metal processing
• Low level chemical handling
• Resin application
• Pressure/Steam water cleaning
• Fibreglass manufacture
• Conforms to:
EN ISO 13688:2013+A1:2021
EN 14605:2005+A1:2009 (Type 3B & 4B)
EN ISO 13982-1:2004+A1:2010 (Type 5B)
EN 13034:2005+A1:2009 (Type 6B)
EN 1073-2:2002 (Class 2)
EN 14126:2003+AC:2004
Resistance to Penetration by contaminated liquids under hydrostatic pressure = Class 6
Resistance to Penetration by infective agents due to mechanical contact with substances containing contaminated liquids = Class 6
Resistance to penetration by contaminated liquid aerosols = Class 3
Resistance to penetration by contaminated solid particles = Class 3
EN 1149-5: 2018
EN 14325:2004
Protects against:
• Chemical & Viral agents (including Coronavirus)
• Bloodborne pathogens
• Sulphuric acid
• Contaminated liquids
• Radioactive Contamination
• For fine dust particles, reduced spray and limited splash
• Anti-static
• 2 way zip front with storm flap
• Elasticated cuffs, ankles, waist and hood
• Microporous fabric 54% polypropylene + 46% polyethylene
• Individually packaged
EN 13034: 2005 + A1: 2009
EN13982-1: 2005 + A1: 2010
EN 1149-5: 2018 Anti-Static – Material Performance and Design Requirements
EN 1073-2: 2002 Protective Clothing against radioactive contamination (no rays)
EN 14126: 2003 + AC:2004 Protective clothing against Infective agents (Type 5B, 6B)
• PU coated polyester.
• Quilted lining with heavy weight (160gsm) polyester filling.
• Concealed hood.
• Two-way heavy duty zip front with storm flap and security pocket.
• 2 Lower pockets with flaps.
• Inside breast pocket.
• Knitted storm cuffs.
• Internal 'Wicking' strip.
• Fully taped seams.
• Reflective Material.
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• Conforms to EN343:2019
Class 3 Water Penetration
Class 1 Air Permeability
Class X Readymade water tower test
• PU coated polyester.
• Quilted lining with heavy weight (160gsm) polyester filling.
• Concealed hood.
• Two-way heavy duty zip front with storm flap and security pocket.
• 2 Lower pockets with flaps.
• In side breast pocket.
• Knitted storm cuffs.
• Internal 'Wicking' strip.
• Fully taped seams.
• Reflective Material.
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• Conforms to EN343:2019
Class 3 Water Penetration
Class 1 Air Permeability
Class X Readymade water tower test
High Visibility Foulweather Jacket
• PU coated polyester.
• Fleece lined.
• Concealed hood.
• Two-way heavy duty zip front with storm flap and security pocket.
• 2 x Lower pockets with flaps.
• Right hand chest pocket with flap.
• Inside breast pocket.
• Knitted storm cuffs.
• Internal 'Wicking' strip.
• Fully taped seams.
• Retro-Reflective Tape.
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• Conforms to EN343:2019
Class 3 Water Penetration
Class 1 Air Permeability
Class X Readymade water tower test
High Visibility Foulweather Jacket
• PU coated polyester.
• Fleece lined.
• Concealed hood.
• Two-way heavy duty zip front with storm flap and security pocket.
• 2 x Lower pockets with flaps.
• Right hand chest pocket with flap.
• Inside breast pocket.
• Knitted storm cuffs.
• Internal 'Wicking' strip.
• Fully taped seams.
• Retro-Reflective Tape.
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• Conforms to EN343:2019
Class 3 Water Penetration
Class 1 Air Permeability
Class X Readymade water tower test
• PU coated polyester.
• Fleece lined.
• Concealed hood.
• Two-way heavy duty zip front with storm flap and security pocket.
• 2 x Lower pockets with flaps.
• Right hand chest pocket with flap.
• Inside breast pocket.
• Knitted storm cuffs.
• Internal 'Wicking' strip.
• Fully taped seams.
• Retro-Reflective Tape.
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• Conforms to EN343:2019
Class 3 Water Penetration
Class 1 Air Permeability
Class X Readymade water tower test
• PU coated polyester.
• Fleece lined.
• Concealed hood.
• Two-way heavy duty zip front with storm flap and security pocket.
• 2 x Lower pockets with flaps.
• Right hand chest pocket with flap.
• Inside breast pocket.
• Knitted storm cuffs.
• Internal 'Wicking' strip.
• Fully taped seams.
• Retro-Reflective Tape.
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• Conforms to EN343:2019
Class 3 Water Penetration
Class 1 Air Permeability
Class X Readymade water tower test
• 100% polyester with non-breathable coating
• Removable sleeves
• Detachable fleece liner
• Unlined hood with draw cord
• Plastic zip with internal storm flap
• Pen pocket to upper left sleeve
• Exposed ribbed cuffs and waist band
• Mobile phone pocket to right breast
• 2 lower front bellows pockets
• 2 hand warmer pockets
• Retro-Reflective tape
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
Class 2 with sleeves removed
• Conforms to EN343:2019
Class 3 Water Penetration
Class 1 Air Permeability
Class X Readymade water tower test
• 100% polyester with non-breathable coating
• Removable sleeves
• Detachable fleece liner
• Unlined hood with draw cord
• Plastic zip with internal storm flap
• Pen pocket to upper left sleeve
• Exposed ribbed cuffs and waist band
• Mobile phone pocket to right breast
• 2 lower front bellows pockets
• 2 hand warmer pockets
• Retro-Reflective tape
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
Class 2 with sleeves removed
• Conforms to EN343:2019
Class 3 Water Penetration
Class 1 Air Permeability
Class X Readymade water tower test
• High quality
• 360gsm micro fleece with full zip front
• Concealed lightweight hood with drawcord
• Yoke shoulders with contrast piping
• Rib knitted waistband and cuffs
• Two lower pockets with zip closure
• Fully lined
• High quality
• 360gsm micro fleece with full zip front
• Concealed lightweight hood with drawcord
• Yoke shoulders with contrast piping
• Rib knitted waistband and cuffs
• Two lower pockets with zip closure
• Fully lined
• High quality
• 360gsm micro fleece with full zip front
• Concealed lightweight hood with drawcord
• Yoke shoulders with contrast piping
• Rib knitted waistband and cuffs
• Two lower pockets with zip closure
• Fully lined
• Breathable PU coated fabric.
• Waterproof jacket fully taped seams.
• Zip front closure to neck.
• Hook and loop fastening storm flap.
• Adjustable cuffs.
• 6cm retro reflective tape.
• Retro reflective piping.
• 2 zip fastening front pockets.
• Concealed hood.
• Hip draw cord.
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• Conforms to EN343:2019
Class 3 Water Penetration
Class 4 Air Permeability
Class X Readymade water tower test
• Breathable PU coated fabric.
• Waterproof jacket fully taped seams.
• Zip front closure to neck.
• Hook and loop fastening storm flap.
• Adjustable cuffs.
• 6cm retro reflective tape.
• Retro reflective piping.
• 2 zip fastening front pockets.
• Concealed hood.
• Hip draw cord.
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• Conforms to EN343:2019
Class 3 Water Penetration
Class 4 Air Permeability
Class X Readymade water tower test
• Detachable hood with drawcord.
• Two-way heavy duty zip front with storm flap.
• Two lower front patch pockets with hook and loop fastening flap.
• ID card 'D' ring.
• Drawcord at hip.
• Internal mesh lining with mobile phone pocket.
• Two roomy internal pockets at lower front.
• Deep Left breast zipped security pocket under front flap.
• Knitted storm cuffs.
• Internal wicking strip.
• Fully taped seams.
• Retro-Reflective tape.
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• Conforms to EN343:2019
Class 3 Water Penetration
Class 4 Air Permeability
Class X Readymade water tower test
• RIS-3279-TOM Issue 2 - Railway use certified.
• Fixed Hood with Drawcord.
• Two-way heavy duty zip front with storm flap.
• Two lower front patch pockets with hook and loop fastening flap.
• ID card 'D' ring.
• Drawcord at hip.
• Internal mesh lining with mobile phone pocket.
• Two roomy internal pockets at lower front.
• Deep Left breast zipped security pocket under front flap.
• Knitted storm cuffs.
• Internal wicking strip.
• Fully taped seams.
• Retro-Reflective tape.
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• Conforms to EN343:2019
Class 3 Water Penetration
Class 4 Air Permeability
Class X Readymade water tower test
• Tailored fit.
• Fully breathable with grey mesh lining
• Concealed hood in collar, hook and loop closure.
• Heavy duty two way front zip to neck with studded storm flap.
• Zipped security pocket.
• Part elasticated waist.
• Angled hip pockets with stud closure flaps & reflective piping.
• Internal right breast smartphone pocket.
• Internal left breast pocket with pen holder.
• Wicking strip.
• Zipped access for badging.
• Storm cuffs with hook and loop adjustment.
• Retro - reflective tape.
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• Conforms to EN343:2019
Class 3 Water Penetration
Class 4 Air Permeability
Class X Readymade water tower test
• Tailored fit.
• Fully breathable with grey mesh lining
• Concealed hood in collar, hook and loop closure.
• Heavy duty two way front zip to neck with studded storm flap.
• Zipped security pocket.
• Part elasticated waist.
• Angled hip pockets with stud closure flaps & reflective piping.
• Internal right breast smartphone pocket.
• Internal left breast pocket with pen holder.
• Wicking strip.
• Zipped access for badging.
• Storm cuffs with hook and loop adjustment.
• Retro - reflective tape.
• EN ISO20471 Class 3
• EN 343:2003 + A1:2007 Class 3. 3.
• RIS-3279-TOM - Railway use certified.
• Polyester/Pongee fabric
• 2 x zipped side pockets with reflective edge
• 1 x zipped security pocket
• Adjustable hook and loop cuffs
• Elasticised waist
• Polar fleece lined
• Zipped logo access
• 2 x internal zipped pockets
• Internal mobile phone pocket
• Taped Seams
• Zip away hood
• Polyester/Pongee fabric
• 2 Zipped side pockets
• 1 Zipped security pocket
• Adjustable hook and loop cuffs
• Draw cord waist
• Half fleece lined
• Zipped logo access
• 2 Internal zipped pockets
• Internal mobile phone pocket
• Taped Seams
• Zip away hood
• Lightweight with PVC coating to reverse
• Concealed hood
• Plastic front zip with storm flap
• Studded cuffs and ankles
• Fully taped seams
• Lightweight with PVC coating to reverse
• Concealed hood
• Plastic front zip with storm flap
• Studded cuffs and ankles
• Fully taped seams
-
176 Products
