• PVC coated 150D polyester.
• Concealed hood.
• Two-way heavy duty zip front with studded storm flap.
• 2 Lower pockets with flaps.
• Knitted storm cuffs.
• Fully taped seams.
• Retro Reflective Tape.
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• Conforms to EN343:2019
Class 3 Water Penetration
Class 1 Air Permeability
Class X Readymade water tower test
• Heavyweight PU coated polyester.
• Nylon lining.
• Concealed hood.
• Two-way heavy weight zip with storm flap.
• 2 Lower hip pockets with flaps.
• Knitted storm cuffs.
• Fully taped seams.
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• Conforms to EN343:2019
Class 3 Water Penetration
Class 1 Air Permeability
Class X Readymade water tower test
• Heavyweight PU coated polyester.
• Nylon lining.
• Concealed hood.
• Two-way heavy weight zip with storm flap.
• 2 Lower hip pockets with flaps.
• Knitted storm cuffs.
• Fully taped seams.
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• Conforms to EN343:2019
Class 3 Water Penetration
Class 1 Air Permeability
Class X Readymade water tower test
• Heavyweight PU coated polyester.
• Quilted lining with polyester filling.
• Concealed hood.
• Two-way heavy duty zip front.
• 2 lower pockets.
• 1 inside pocket.
• Knitted storm cuffs.
• Fully taped seams.
• Retro-Reflective Tape.
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• Conforms to EN343:2019
Class 3 Water Penetration
Class 1 Air Permeability
Class X Readymade water tower test
• Heavyweight PU coated polyester.
• Quilted lining with polyester filling.
• Concealed hood.
• Two-way heavy duty zip front.
• 2 lower pockets.
• 1 inside pocket.
• Knitted storm cuffs.
• Fully taped seams.
• Retro-Reflective Tape.
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• Conforms to EN343:2019
Class 3 Water Penetration
Class 1 Air Permeability
Class X Readymade water tower test
• PVC coated 150D polyester.
• Concealed hood.
• Two-way heavy duty zip front with studded storm flap.
• 2 Lower pockets with flaps.
• Knitted storm cuffs.
• Fully taped seams.
• Retro Reflective Tape.
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• Conforms to EN343:2019
Class 3 Water Penetration
Class 1 Air Permeability
Class X Readymade water tower test
• PVC coated 150D polyester.
• Concealed hood.
• Two-way heavy duty zip front with studded storm flap.
• 2 Lower pockets with flaps.
• Knitted storm cuffs.
• Fully taped seams.
• Retro Reflective Tape.
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• Conforms to EN343:2019
Class 3 Water Penetration
Class 1 Air Permeability
Class X Readymade water tower test
• Flame Retardant, Anti-Static, ARC Flash Balaclava hood.
• 210gsm 60/40 Modacrylic/ cotton with anti static.
• Inherently flame retardant fabric.
• FR properties will not diminish with repeated laundering
• Soft comfortable fabric with contrast FR sewing thread
• Conforms to:
EN ISO 13688:2013
EN 1149-5:2018
EN ISO 11612:2015 (A1 A2 B1 C1)
EN 61482-2:2020 - (EBT50 = 6.8 Cal/cm2)
(ELIM = 5.6 Cal/cm2)
(APC = 1)
• 75% Ripstop Polyester with a 25% PU Laminate
• 210gsm fabric weight
• Medium weight jacket.
• Bird eye mesh liner allows for Level 4 breathability with an Ret of 9.55
• Water penetration tested to hydrostatic pressure of 177,000 Pa
• Concealed right breast pocket
• Chest pocket with laminated water resistance zip
• D ring hook for security or ID pass
• Detachable concealed 3 panel fully adjustable hood
• Full length zip for complete closures
• Hi viz accents for added styling
• External stud adjuster for cuff
• Inside pocket for phone
• Concealed zip pocket to storm flap
• Double Studded snorkel fleece lined neck
• Fully taped seams
• Soft touch zip pulls on all zips
• Internal wicking strip to reduce water ingress
• Fleece lined zip cover at nape of neck.
• Segmented tape to shoulders for additional visibility
• Generous sizing to interact with other garments
• 60mm segmented tape for greater visibility
• Jacket can be used in combination with the Interactive bodywarmer (BSD31)
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• RIS-3279-TOM Issue 2 - Railway use certified.
• Conforms to EN343:2019
Class 4 Water Penetration
Class 4 Air Permeability
Class X Readymade water tower test
75% Ripstop Polyester with a 25% PU Laminate
210gsm fabric weight
Medium weight jacket.
Bird eye mesh liner enables the Level 4 breathability with an Ret of 9.55
Water penetration tested to hydrostatic pressure of 177,000 Pa
Fully taped seams
60mm segmented tape for greater visibility
Segmented tape to shoulders for additional visibility
Hi viz accents for added styling
Detachable concealed 3 panel fully adjustable hood
Full length heavy duty YKK zip with stud sealed storm flap
Internal wicking strip to reduce water ingress
Double Studded snorkel with fleece lined neck
Soft touch zip pulls on all zips
Concealed right breast pocket
Left breast pocket with laminated water resistance zip
Concealed zip pocket to storm flap
Two lower pockets with stud sealed flaps
Two inside pockets
One internal phone pocket
Internal knitted cuffs
External stud adjusters to storm cuffs
D ring hook for security or ID pass
Contrast colour in areas that soil most
Generous sizing to interact with other garments
• Jacket can be used in combination with the Interactive bodywarmer (BSDBWTT)
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• RIS-3279-TOM Issue 2 - Railway use certified.
• Conforms to EN343:2019
Class 4 Water Penetration
Class 4 Air Permeability
Class X Readymade water tower test
75% Ripstop Polyester with a 25% PU Laminate
210gsm fabric weight
Medium weight jacket.
Bird eye mesh liner enables the Level 4 breathability with an Ret of 9.55
Water penetration tested to hydrostatic pressure of 177,000 Pa
Fully taped seams
60mm segmented tape for greater visibility
Segmented tape to shoulders for additional visibility
Hi viz accents for added styling
Detachable concealed 3 panel fully adjustable hood
Full length heavy duty YKK zip with stud sealed storm flap
Internal wicking strip to reduce water ingress
Double Studded snorkel with fleece lined neck
Soft touch zip pulls on all zips
Concealed right breast pocket
Left breast pocket with laminated water resistance zip
Concealed zip pocket to storm flap
Two lower pockets with stud sealed flaps
Two inside pockets
One internal phone pocket
Internal knitted cuffs
External stud adjusters to storm cuffs
D ring hook for security or ID pass
Contrast colour in areas that soil most
Generous sizing to interact with other garments
• Jacket can be used in combination with the Interactive bodywarmer (BSDBWTT)
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• Conforms to EN343:2019
Class 4 Water Penetration
Class 4 Air Permeability
Class X Readymade water tower test
• Hooded sweatshirt
• 280 gsm fleece fabric
• 100% polyester
• Anti pill (the fabric has been treated to prevent little balls (or pills) of thread appearing on the surface of the fabric)
• Handwarmer pockets.
• 50mm Retro-reflective tape
• 2 bands around chest and arms with shoulder accents
• By using segmented, heat applied tape, the garment is less restrictive than garments where traditional stitched tape has been used
• Improves the washing durability on stitched tape
• Improved breathability by using segmented, heat applied tape
• Produces a modern, comfortable garment
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• RIS-3279-TOM Issue 2 - Railway use certified.
• Hooded sweatshirt
• 280 gsm fleece fabric
• 100% polyester
• Anti pill (the fabric has been treated to prevent little balls (or pills) of thread appearing on the surface of the fabric)
• Handwarmer pockets.
• 50mm Retro-reflective tape
• 2 bands around chest and arms with shoulder accents
• By using segmented, heat applied tape, the garment is less restrictive than garments where traditional stitched tape has been used
• Improves the washing durability on stitched tape
• Improved breathability by using segmented, heat applied tape
• Produces a modern, comfortable garment
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• 280 gsm fleece fabric
• 100% Recycled polyester
• Anti pill (the fabric has been treated to prevent little balls (or pills) of thread appearing on the surface of the fabric)
• Handwarmer pocket.
• Hex patterned heatseal Retro-Reflective tape for comfort and flexability.
• Two band & brace
• Global Recycled Standard Certificated
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• RIS-3279-TOM Issue 2 - Railway use certified.
• 280 gsm fleece fabric
• 100% Recycled polyester
• Anti pill (the fabric has been treated to prevent little balls (or pills) of thread appearing on the surface of the fabric)
• Handwarmer pocket.
• Hex patterned heatseal Retro-Reflective tape for comfort and flexability.
• Two band & brace
• Global Recycled Standard Certificated
• Conforms to EN ISO 13688:2013+A1:2021
• Conforms to EN ISO 20471:2013+A1:2016
Class 3 High Visibility
• Qualitative fit test kit including hood, collar, 2 nebulisers, bitter tasting sensitivity solution, bitter tasting fit test solution and laminated user instructions.
• FT-30 uses a test solution of denatonium benzoate to produce a very bitter tasting spray
• Spare hoods, nebulisers and solutions are also available
• Spare hoods, nebulisers and solutions are available for the fit test kits.
Similar to the S-655, the 3M S-657 Hood uses a double shroud design for its respiratory seal; wearers can select on their seal design based on personal preference. The wearer should tuck the inner shroud into a shirt or protective coverall, which allows excess air to be channelled over the body for additional comfort.
The 3M S-657 Hood offers head, face, neck and shoulder coverage as well as providing eye and face protection to EN166 - liquid splash and low energy impact (grade F) the same classification for impact resistance as safety spectacles! Manufactured using a general purpose, fabric, the S-657 is a cost effective, practical powered air solution.
When used in conjunction with 3M Powered and Supplied Air Systems the S-657 offers an assigned protection factor (APF•) of:
• Jupiter APF= 40
• Dustmaster APF= 10
• TR-300 APF = 40
• V-500 APF= 40
Assigned Protection Factor (APF) as detailed in HSE HSG53.
The 4520 is made from extremely lightweight and breathable material and is designed to offer protection against hazardous dusts and limited liquid splashes.
• Elasticated hood, ankles and waist.
• 2 way zip with sealable tab on storm flap.
• 3- panel hood.
• Knitted cuffs.
• Low linting.
The 3M 4530 is designed to be lightweight and breathable whilst offering protection against hazardous dusts and limited liquid splashes. The material complies with ISO 14116:2008 for limited flame spread index 1 (must be worn over an index 2 or 3 garment).
Type 5/6
Elasticated hood, ankles and waist
2 way zip with fully sealable storm flap 3-panel hood Knitted cuffs Low linting
• Highly breathable, antistatic suit used stripping, clear up or handling of asbestos, general maintenance, construction and contract cleaning
• 3-piece hood
• Elasticated hood, wrists, waist and ankles
• 2-way front zipper with re-sealable storm flap
• Finger loops
• Anti-static treatment
• Conforms to Type 5, 6, EN1073-2 and EN1149-5
• Provides both protection and comfort with exceptional liquid and particle protection
• 3-piece hood
• Elasticated hood, wrists, waist and ankles
• 2-way front zipper with resealable storm flap
• Finger loops
• Conforms to Type 5, 6, EN14126, EN1073-2 and EN1149-5
• Polyester/Pongee fabric
• 2 x zipped side pockets with reflective edge
• 1 x zipped security pocket
• Adjustable hook and loop cuffs
• Elasticised waist
• Polar fleece lined
• Zipped logo access
• 2 x internal zipped pockets
• Internal mobile phone pocket
• Taped Seams
• Zip away hood
• Polyester/Pongee fabric
• 2 Zipped side pockets
• 1 Zipped security pocket
• Adjustable hook and loop cuffs
• Draw cord waist
• Half fleece lined
• Zipped logo access
• 2 Internal zipped pockets
• Internal mobile phone pocket
• Taped Seams
• Zip away hood
Filtered escape half mask protecting the user against chemical products when escaping to a safe and breathable environment. Hood made of PVC without lining. Transparent PVC visor.
Filter type ABEK. It offers protection against a wide range of toxic gases and vapours. It does not provide breathable air
• Clear visor PVC
• Filters 755/756
• Half mask: 756
• Material: PVC without lining
• Nominal protection factor (NPF):50
• Norm: EN 140:1998
-
176 Products
