• UV Stabilised ABS, scratch resistant vented helmet shell
• Lightweight
• Short peak for increased upward vision
• Limited rain gutter
• Provides lateral crushing protection
• Push-Key suspension with slide adjustment and wipeable PVC sewn in sweatband
• Standard slots to easily attach MSA visors and/or ear muffs
• 2 or 3-point chinstraps to be bought separately
• 2- point chinstrap versions, MSAB0259378 & MSA9100001
• Available in a range of colours: White, Yellow, Red, Blue, Green, Orange, Hi Vis Orange and Hi Vis Yellow
• Non-vented versions, other suspensions including Fas-Trac III and helmet printing available upon request
• Conforms to the following Standards
• EN 397:2012 Safety industrial helmets
• Electrostatic-Ineris certified (testing according to EN ISO 80079-36:2016), Suitable for use in ATEX environments hazardous zones 1,2, 20, 21 and 22

In addition, Non-vented versions are certified to:
• EN 50365 Insulating helmets for use on low voltage installations

MSA reference: GV611-0000000-000 VGARD 200 V WHITE PK+PVC

• UV Stabilised ABS, scratch resistant vented helmet shell
• Lightweight
• Short peak for increased upward vision
• Limited rain gutter
• Provides lateral crushing protection
•-Fas-Trac® III with wheel ratchet and wipeable PVC sewn in Sweatband
• Standard slots to easily attach MSA visors and/or ear muffs
• 2 or 3-point chinstraps to be bought separately
• 2- point chinstrap versions, MSAB0259378 & MSA9100001
• Available in a range of colours: White, Yellow, Red, Blue, Green, Orange, Hi Vis Orange and Hi Vis Yellow
• Non-vented versions, other suspensions including Push-Key and helmet printing available upon request
• Conforms to the following Standards
• EN 397:2012 Safety industrial helmets
• Electrostatic-Ineris certified (testing according to EN ISO 80079-36:2016), Suitable for use in ATEX environments hazardous zones 1,2, 20, 21 and 22

In addition, Non-vented versions are certified to:
• EN 50365 Insulating helmets for use on low voltage installations

MSA reference: GV612-0000000-000 VGARD 200 V WHITE FTIII+PVC

• UV Stabilised ABS, scratch resistant vented helmet shell
• Lightweight
• Short peak for increased upward vision
• Limited rain gutter
• Provides lateral crushing protection
• Push-Key suspension with slide adjustment and wipeable PVC sewn in sweatband
• Standard slots to easily attach MSA visors and/or ear muffs
• 2 or 3-point chinstraps to be bought separately
• 2- point chinstrap versions, MSAB0259378 & MSA9100001
• Available in a range of colours: White, Yellow, Red, Blue, Green, Orange, Hi Vis Orange and Hi Vis Yellow
• Non-vented versions, other suspensions including Fas-Trac III and helmet printing available upon request
• Conforms to the following Standards
• EN 397:2012 Safety industrial helmets
• Electrostatic-Ineris certified (testing according to EN ISO 80079-36:2016), Suitable for use in ATEX environments hazardous zones 1,2, 20, 21 and 22

In addition, Non-vented versions are certified to:
• EN 50365 Insulating helmets for use on low voltage installations

MSA reference: GV621-0000000-000 VGARD 200 VENTED YELLOW PK+PVC

• UV Stabilised ABS, scratch resistant vented helmet shell
• Lightweight
• Short peak for increased upward vision
• Limited rain gutter
• Provides lateral crushing protection
• Push-Key suspension with slide adjustment and wipeable PVC sewn in sweatband
• Standard slots to easily attach MSA visors and/or ear muffs
• 2 or 3-point chinstraps to be bought separately
• 2- point chinstrap versions, MSAB0259378 & MSA9100001
• Available in a range of colours: White, Yellow, Red, Blue, Green, Orange, Hi Vis Orange and Hi Vis Yellow
• Non-vented versions, other suspensions including Fas-Trac III and helmet printing available upon request
• Conforms to the following Standards
• EN 397:2012 Safety industrial helmets
• Electrostatic-Ineris certified (testing according to EN ISO 80079-36:2016), Suitable for use in ATEX environments hazardous zones 1,2, 20, 21 and 22

In addition, Non-vented versions are certified to:
• EN 50365 Insulating helmets for use on low voltage installations

MSA reference: GV631-0000000-000 VGARD 200 V RED PK+PVC

• UV Stabilised ABS, scratch resistant vented helmet shell
• Lightweight
• Short peak for increased upward vision
• Limited rain gutter
• Provides lateral crushing protection
• Push-Key suspension with slide adjustment and wipeable PVC sewn in sweatband
• Standard slots to easily attach MSA visors and/or ear muffs
• 2 or 3-point chinstraps to be bought separately
• 2- point chinstrap versions, MSAB0259378 & MSA9100001
• Available in a range of colours: White, Yellow, Red, Blue, Green, Orange, Hi Vis Orange and Hi Vis Yellow
• Non-vented versions, other suspensions including Fas-Trac III and helmet printing available upon request
• Conforms to the following Standards
• EN 397:2012 Safety industrial helmets
• Electrostatic-Ineris certified (testing according to EN ISO 80079-36:2016), Suitable for use in ATEX environments hazardous zones 1,2, 20, 21 and 22

In addition, Non-vented versions are certified to:
• EN 50365 Insulating helmets for use on low voltage installations

MSA Reference: GV641-0000000-000 VGARD 200 VENTED GREEN PK+PVC

• UV Stabilised ABS, scratch resistant vented helmet shell
• Lightweight
• Short peak for increased upward vision
• Limited rain gutter
• Provides lateral crushing protection
• Push-Key suspension with slide adjustment and wipeable PVC sewn in sweatband
• Standard slots to easily attach MSA visors and/or ear muffs
• 2 or 3-point chinstraps to be bought separately
• 2- point chinstrap versions, MSAB0259378 & MSA9100001
• Available in a range of colours: White, Yellow, Red, Blue, Green, Orange, Hi Vis Orange and Hi Vis Yellow
• Non-vented versions, other suspensions including Fas-Trac III and helmet printing available upon request
• Conforms to the following Standards
• EN 397:2012 Safety industrial helmets
• Electrostatic-Ineris certified (testing according to EN ISO 80079-36:2016), Suitable for use in ATEX environments hazardous zones 1,2, 20, 21 and 22

In addition, Non-vented versions are certified to:
• EN 50365 Insulating helmets for use on low voltage installations

MSA Reference: GV651-0000000-000 VGARD 200 V BLUE PK+PVC

• UV Stabilised ABS, scratch resistant vented helmet shell
• Lightweight
• Short peak for increased upward vision
• Limited rain gutter
• Provides lateral crushing protection
• Push-Key suspension with slide adjustment and wipeable PVC sewn in sweatband
• Standard slots to easily attach MSA visors and/or ear muffs
• 2 or 3-point chinstraps to be bought separately
• 2- point chinstrap versions, MSAB0259378 & MSA9100001
• Available in a range of colours: White, Yellow, Red, Blue, Green, Orange, Hi Vis Orange and Hi Vis Yellow
• Non-vented versions, other suspensions including Fas-Trac III and helmet printing available upon request
• Conforms to the following Standards
• EN 397:2012 Safety industrial helmets
• Electrostatic-Ineris certified (testing according to EN ISO 80079-36:2016), Suitable for use in ATEX environments hazardous zones 1,2, 20, 21 and 22

In addition, Non-vented versions are certified to:
• EN 50365 Insulating helmets for use on low voltage installations

MSA Reference: GV661-0000000-000 VGARD 200 V ORANGE PK+PVC

• UV Stabilised ABS, scratch resistant vented helmet shell
• Lightweight
• Short peak for increased upward vision
• Limited rain gutter
• Provides lateral crushing protection
• Push-Key suspension with slide adjustment and wipeable PVC sewn in sweatband
• Standard slots to easily attach MSA visors and/or ear muffs
• 2 or 3-point chinstraps to be bought separately
• 2- point chinstrap versions, MSAB0259378 & MSA9100001
• Available in a range of colours: White, Yellow, Red, Blue, Green, Orange, Hi Vis Orange and Hi Vis Yellow
• Non-vented versions, other suspensions including Fas-Trac III and helmet printing available upon request
• Conforms to the following Standards
• EN 397:2012 Safety industrial helmets
• Electrostatic-Ineris certified (testing according to EN ISO 80079-36:2016), Suitable for use in ATEX environments hazardous zones 1,2, 20, 21 and 22

In addition, Non-vented versions are certified to:
• EN 50365 Insulating helmets for use on low voltage installations

MSA Reference: GV691-0000000-000 VGARD 200 V ORANGE HV PK+PVC

• UV Stabilised ABS, scratch resistant vented helmet shell
• Lightweight
• Short peak for increased upward vision
• Limited rain gutter
• Provides lateral crushing protection
• Push-Key suspension with slide adjustment and wipeable PVC sewn in sweatband
• Standard slots to easily attach MSA visors and/or ear muffs
• 2 or 3-point chinstraps to be bought separately
• 2- point chinstrap versions, MSAB0259378 & MSA9100001
• Available in a range of colours: White, Yellow, Red, Blue, Green, Orange, Hi Vis Orange and Hi Vis Yellow
• Non-vented versions, other suspensions including Fas-Trac III and helmet printing available upon request
• Conforms to the following Standards
• EN 397:2012 Safety industrial helmets
• Electrostatic-Ineris certified (testing according to EN ISO 80079-36:2016), Suitable for use in ATEX environments hazardous zones 1,2, 20, 21 and 22

In addition, Non-vented versions are certified to:
• EN 50365 Insulating helmets for use on low voltage installations

MSA Reference: GV6A1-0000000-000 VGARD 200 V FLUORESC. YELLOW PK+PVC

• UV Stabilised ABS, scratch resistant non-vented helmet shell
• No Peak for confined spaces and to ensure perfect upward vision when working at height
• Built-In rain gutter for outdoor operations
• Provides lateral crushing protection
• Fas-Trac III suspension with wheel ratchet and wipeable PVC sewn in sweatband
• Standard slots to easily attach MSA visors and/or ear muffs
• 2, 3 or 4-point chinstraps to be bought separately
• Available in a range of colours: White, Yellow, Red, Blue, Green, Orange, Hi Vis Orange and Hi Vis Yellow
• Other suspension variations including Push-Key, badge holder and helmet printing available upon request
• Conforms to the following Standards
• EN 397:2012 440V AC Safety industrial helmets
• EN 50365 Insulating helmets for use on low voltage insulations
• Electrostatic-Ineris certified (testing according to EN ISO 80079-36:2016), suitable for use in ATEX environments hazardous zones 1,2, 20, 21 and 22

MSA Reference: GV912-0000000-000 V-GARD 520 WHITE FTIII+PVC

• UV Stabilised ABS, scratch resistant non-vented helmet shell
• No Peak for confined spaces and to ensure perfect upward vision when working at height
• Built-In rain gutter for outdoor operations
• Provides lateral crushing protection
• Fas-Trac III suspension with wheel ratchet and wipeable PVC sewn in sweatband
• Standard slots to easily attach MSA visors and/or ear muffs
• 2, 3 or 4-point chinstraps to be bought separately
• Available in a range of colours: White, Yellow, Red, Blue, Green, Orange, Hi Vis Orange and Hi Vis Yellow
• Other suspension variations including Push-Key, badge holder and helmet printing available upon request
• Conforms to the following Standards
• EN 397:2012 440V AC Safety industrial helmets
• EN 50365 Insulating helmets for use on low voltage insulations
• Electrostatic-Ineris certified (testing according to EN ISO 80079-36:2016), suitable for use in ATEX environments hazardous zones 1,2, 20, 21 and 22

MSA Reference: GV922-0000000-000 V-GARD 520 YELLOW FTIII+PVC

• UV Stabilised ABS, scratch resistant non-vented helmet shell
• No Peak for confined spaces and to ensure perfect upward vision when working at height
• Built-In rain gutter for outdoor operations
• Provides lateral crushing protection
• Fas-Trac III suspension with wheel ratchet and wipeable PVC sewn in sweatband
• Standard slots to easily attach MSA visors and/or ear muffs
• 2, 3 or 4-point chinstraps to be bought separately
• Available in a range of colours: White, Yellow, Red, Blue, Green, Orange, Hi Vis Orange and Hi Vis Yellow
• Other suspension variations including Push-Key, badge holder and helmet printing available upon request
• Conforms to the following Standards
• EN 397:2012 440V AC Safety industrial helmets
• EN 50365 Insulating helmets for use on low voltage insulations
• Electrostatic-Ineris certified (testing according to EN ISO 80079-36:2016), suitable for use in ATEX environments hazardous zones 1,2, 20, 21 and 22

MSA Reference: GV932-0000000-000 V-GARD 520 RED FTIII+PVC

• UV Stabilised ABS, scratch resistant non-vented helmet shell
• No Peak for confined spaces and to ensure perfect upward vision when working at height
• Built-In rain gutter for outdoor operations
• Provides lateral crushing protection
• Fas-Trac III suspension with wheel ratchet and wipeable PVC sewn in sweatband
• Standard slots to easily attach MSA visors and/or ear muffs
• 2, 3 or 4-point chinstraps to be bought separately
• Available in a range of colours: White, Yellow, Red, Blue, Green, Orange, Hi Vis Orange and Hi Vis Yellow
• Other suspension variations including Push-Key, badge holder and helmet printing available upon request
• Conforms to the following Standards
• EN 397:2012 440V AC Safety industrial helmets
• EN 50365 Insulating helmets for use on low voltage insulations
• Electrostatic-Ineris certified (testing according to EN ISO 80079-36:2016), suitable for use in ATEX environments hazardous zones 1,2, 20, 21 and 22

MSA Reference: GV942-0000000-000 V-GARD 520 GREEN FTIII+PVC

• UV Stabilised ABS, scratch resistant non-vented helmet shell
• No Peak for confined spaces and to ensure perfect upward vision when working at height
• Built-In rain gutter for outdoor operations
• Provides lateral crushing protection
• Fas-Trac III suspension with wheel ratchet and wipeable PVC sewn in sweatband
• Standard slots to easily attach MSA visors and/or ear muffs
• 2, 3 or 4-point chinstraps to be bought separately
• Available in a range of colours: White, Yellow, Red, Blue, Green, Orange, Hi Vis Orange and Hi Vis Yellow
• Other suspension variations including Push-Key, badge holder and helmet printing available upon request
• Conforms to the following Standards
• EN 397:2012 440V AC Safety industrial helmets
• EN 50365 Insulating helmets for use on low voltage insulations
• Electrostatic-Ineris certified (testing according to EN ISO 80079-36:2016), suitable for use in ATEX environments hazardous zones 1,2, 20, 21 and 22

MSA Reference: GV952-0000000-000 V-GARD 520 BLUE FTIII+PVC

• UV Stabilised ABS, scratch resistant non-vented helmet shell
• No Peak for confined spaces and to ensure perfect upward vision when working at height
• Built-In rain gutter for outdoor operations
• Provides lateral crushing protection
• Fas-Trac III suspension with wheel ratchet and wipeable PVC sewn in sweatband
• Standard slots to easily attach MSA visors and/or ear muffs
• 2, 3 or 4-point chinstraps to be bought separately
• Available in a range of colours: White, Yellow, Red, Blue, Green, Orange, Hi Vis Orange and Hi Vis Yellow
• Other suspension variations including Push-Key, badge holder and helmet printing available upon request
• Conforms to the following Standards
• EN 397:2012 440V AC Safety industrial helmets
• EN 50365 Insulating helmets for use on low voltage insulations
• Electrostatic-Ineris certified (testing according to EN ISO 80079-36:2016), suitable for use in ATEX environments hazardous zones 1,2, 20, 21 and 22

MSA Reference: GV962-0000000-000 V-GARD 520 ORANGE FTIII+PVC

• UV Stabilised ABS, scratch resistant non-vented helmet shell
• No Peak for confined spaces and to ensure perfect upward vision when working at height
• Built-In rain gutter for outdoor operations
• Provides lateral crushing protection
• Fas-Trac III suspension with wheel ratchet and wipeable PVC sewn in sweatband
• Standard slots to easily attach MSA visors and/or ear muffs
• 2, 3 or 4-point chinstraps to be bought separately
• Available in a range of colours: White, Yellow, Red, Blue, Green, Orange, Hi Vis Orange and Hi Vis Yellow
• Other suspension variations including Push-Key, badge holder and helmet printing available upon request
• Conforms to the following Standards
• EN 397:2012 440V AC Safety industrial helmets
• EN 50365 Insulating helmets for use on low voltage insulations
• Electrostatic-Ineris certified (testing according to EN ISO 80079-36:2016), suitable for use in ATEX environments hazardous zones 1,2, 20, 21 and 22

MSA Reference: GV982-0000000-000 V-GARD 520 BLACK FTIII+PVC

• UV Stabilised ABS, scratch resistant non-vented helmet shell
• No Peak for confined spaces and to ensure perfect upward vision when working at height
• Built-In rain gutter for outdoor operations
• Provides lateral crushing protection
• Fas-Trac III suspension with wheel ratchet and wipeable PVC sewn in sweatband
• Standard slots to easily attach MSA visors and/or ear muffs
• 2, 3 or 4-point chinstraps to be bought separately
• Available in a range of colours: White, Yellow, Red, Blue, Green, Orange, Hi Vis Orange and Hi Vis Yellow
• Other suspension variations including Push-Key, badge holder and helmet printing available upon request
• Conforms to the following Standards
• EN 397:2012 440V AC Safety industrial helmets
• EN 50365 Insulating helmets for use on low voltage insulations
• Electrostatic-Ineris certified (testing according to EN ISO 80079-36:2016), suitable for use in ATEX environments hazardous zones 1,2, 20, 21 and 22

MSA Reference: GV992-0000000-000 V-GARD 520 ORANGE HV FTIII+PVC

• Balanced, modern, low-profile vented helmet with integrated eye protection .6-point Fas-Trac® III ratchet suspension, integrated over spectacles with intelligent adjustment and innovative rubber seal. For use where top impact hazards to the head, UV and particle hazards to the eye exist.
• Made of ABS for strength and lateral crush protection (EN397 LD option)
• Modern, dynamic and sports styled shell
• Channel around perimeter of the helmet diverts rain and debris from user
• Ventilation holes placed for optimized airflow
• The over spectacles have a premium anti fog and anti scratch coating to help ensure good visibility is maintained
• Non-vented versions, badge & lamp holders, logo customization and stickers available upon request
• Other colour helmet shells include Yellow, Red, Green, Blue and Orange
• Conforms to the following Standards:
EN397:2012 Safety industrial helmets
EN166:2001 personal eye equipment (2C-1,2 1 B K N)
2C - UV filter with enhanced colour recognition
1,2 - Clear or amber ocular
1 Optical class 1 for permanent usage
B - Resistance to medium energy impact 120 m/s
KN - Resistance to Scratches (K) and to Fogging of oculars (N)
• Non-vented versions are certified electrostatic-INERIS for use in ATEX/explosive environments and EN 50365:2002 Insulating helmets for use on low voltage installations

• MSA Reference: GVC1A-0000000-000

• Balanced, modern, low-profile vented helmet with integrated eye protection .6-point Fas-Trac® III ratchet suspension, integrated over spectacles with intelligent adjustment and innovative rubber seal. For use where top impact hazards to the head, UV and particle hazards to the eye exist.
• Made of ABS for strength and lateral crush protection (EN397 LD option)
• Modern, dynamic and sports styled shell
• Channel around perimeter of the helmet diverts rain and debris from user
• Ventilation holes placed for optimized airflow
• The over spectacles have a premium anti fog and anti scratch coating to help ensure good visibility is maintained
• Non-vented versions, badge & lamp holders, logo customization and stickers available upon request
• Other colour helmet shells include Yellow, Red, Green, Blue and Orange
• Conforms to the following Standards:
EN397:2012 Safety industrial helmets
EN166:2001 personal eye equipment (2C-1,2 1 B K N)
2C - UV filter with enhanced colour recognition
1,2 - Clear or amber ocular
1 Optical class 1 for permanent usage
B - Resistance to medium energy impact 120 m/s
KN - Resistance to Scratches (K) and to Fogging of oculars (N)
• Non-vented versions are certified electrostatic-INERIS for use in ATEX/explosive environments and EN 50365:2002 Insulating helmets for use on low voltage installations

MSA Reference: GVC1A-00000G0-000

• Balanced, modern, low-profile vented helmet with integrated eye protection .6-point Fas-Trac® III ratchet suspension, integrated over spectacles with intelligent adjustment and innovative rubber seal. For use where top impact hazards to the head, UV and particle hazards to the eye exist.
• Made of ABS for strength and lateral crush protection (EN397 LD option)
• Modern, dynamic and sports styled shell
• Channel around perimeter of the helmet diverts rain and debris from user
• Ventilation holes placed for optimized airflow
• The over spectacles have a premium anti fog and anti scratch coating to help ensure good visibility is maintained
• Non-vented versions, badge & lamp holders, logo customization and stickers available upon request
• Other colour helmet shells include Yellow, Red, Green, Blue and Orange
• Conforms to the following Standards:
EN397:2012 Safety industrial helmets
EN166:2001 personal eye equipment (2C-1,2 1 B K N)
2C - UV filter with enhanced colour recognition
1,2 - Clear or amber ocular
1 Optical class 1 for permanent usage
B - Resistance to medium energy impact 120 m/s
KN - Resistance to Scratches (K) and to Fogging of oculars (N)
• Non-vented versions are certified electrostatic-INERIS for use in ATEX/explosive environments and EN 50365:2002 Insulating helmets for use on low voltage installations

MSA Reference: GVC1A-00000H0-000

• Balanced, modern, low-profile vented helmet with integrated eye protection .6-point Fas-Trac® III ratchet suspension, integrated over spectacles with intelligent adjustment and innovative rubber seal. For use where top impact hazards to the head, UV and particle hazards to the eye exist.
• Made of ABS for strength and lateral crush protection (EN397 LD option)
• Modern, dynamic and sports styled shell
• Channel around perimeter of the helmet diverts rain and debris from user
• Ventilation holes placed for optimized airflow
• The tinted over spectacles have a premium anti fog and anti scratch coating to help ensure good visibility is maintained
• Non-vented versions, badge & lamp holders, logo customization and stickers available upon request
• Other colour helmet shells include Yellow, Red, Green, Blue and Orange
• Conforms to the following Standards:
EN397:2012 Safety industrial helmets
EN166:2001 personal eye equipment (2C-1,2 1 B K N)
2C - UV filter with enhanced colour recognition
1,2 - Clear or amber ocular
1 Optical class 1 for permanent usage
B - Resistance to medium energy impact 120 m/s
KN - Resistance to Scratches (K) and to Fogging of oculars (N)
• Non-vented versions are certified electrostatic-INERIS for use in ATEX/explosive environments and EN 50365:2002 Insulating helmets for use on low voltage installations

• MSA Reference: GVC1A-000C000-000

Balanced lightweight electrician’s safety helmet, non-vented, with 6-point Fas-Trac® III ratchet suspension and GS-ET-29 class 1 face shield certified for protection against arc flash. For use where top impact hazards to the head, chemical splash, Ultra-Violet radiation, molten metal splash or electric arc to the face exist.

• The helmet is made of ABS for strength and lateral crush protection (LD option)
• Modern, dynamic with sports styled shell
• Low profile (patented visor mechanism which minimises helmet shell size)
• Channel around perimeter of the helmet diverts rain and debris from user
• The face shield has premium anti-fog/anti-scratch coated visor fits over all corrective and safety glasses
• 6-point Fas-Trac® III ratchet suspension with premium washable and replaceable sweatband
• Complete with 4-point chinstrap for better helmet retention
• Helmet delivered in a protective reusable storage bag
• Compatible with hearing protection
• Optional chin cup made with arc flash resistant materials, Arc flash ear flaps, badge & Lamp holders, logo customisation and stickers available upon request
• Other colour helmet shells available - Yellow, Red, Green, Blue and Orange
Conforms to the following Standards
• Anti-static assembly; certified electrostatic-INERIS for use in ATEX/explosive environments
• Electrically insulating helmet meeting EN 397:2012 Industrial safety helmets 440 V AC and EN 50365 Insulating helmets for use on low voltage installations 1000 V AC
• EN166:2001 personal eye equipment 2C-1,2 1 3 B 8-1-0 9 KN
• GS-ET 29 Electric Arc, class 1, 4KA

MSA Reference: GVF1A-80A0000-000

Balanced lightweight electrician’s safety helmet, non-vented, with 6-point Fas-Trac® III ratchet suspension and GS-ET-29 class 1 face shield certified for protection against arc flash. For use where top impact hazards to the head, chemical splash, Ultra-Violet radiation, molten metal splash or electric arc to the face exist.

• The helmet is made of ABS for strength and lateral crush protection (LD option)
• Modern, dynamic with sports styled shell
• Low profile (patented visor mechanism which minimises helmet shell size)
• Channel around perimeter of the helmet diverts rain and debris from user
• The face shield has premium anti-fog/anti-scratch coated visor fits over all corrective and safety glasses
• 6-point Fas-Trac® III ratchet suspension with premium washable and replaceable sweatband
• Complete with 4-point chinstrap for better helmet retention
• Helmet delivered in a protective reusable storage bag
• Compatible with hearing protection
• Optional chin cup made with arc flash resistant materials, Arc flash ear flaps, badge & Lamp holders, logo customisation and stickers available upon request
• Other colour helmet shells available - Yellow, Red, Green, Blue and Orange
Conforms to the following Standards
• Anti-static assembly; certified electrostatic-INERIS for use in ATEX/explosive environments
• Electrically insulating helmet meeting EN 397:2012 Industrial safety helmets 440 V AC and EN 50365 Insulating helmets for use on low voltage installations 1000 V AC
• EN166:2001 personal eye equipment 2C-1,2 1 3 B 8-1-0 9 KN
• GS-ET 29 Electric Arc, class 1, 4KA

MSA Reference: GVF1A-80A0000-000

Balanced lightweight electrician’s safety helmet, non-vented, with 6-point Fas-Trac® III ratchet suspension and GS-ET-29 class 1 face shield certified for protection against arc flash. For use where top impact hazards to the head, chemical splash, Ultra-Violet radiation, molten metal splash or electric arc to the face exist.

• The helmet is made of ABS for strength and lateral crush protection (LD option)
• Modern, dynamic with sports styled shell
• Low profile (patented visor mechanism which minimises helmet shell size)
• Channel around perimeter of the helmet diverts rain and debris from user
• The face shield has premium anti-fog/anti-scratch coated visor fits over all corrective and safety glasses
• 6-point Fas-Trac® III ratchet suspension with premium washable and replaceable sweatband
• Complete with 4-point chinstrap for better helmet retention
• Helmet delivered in a protective reusable storage bag
• Compatible with hearing protection
• Optional chin cup made with arc flash resistant materials, Arc flash ear flaps, badge & Lamp holders, logo customisation and stickers available upon request
• Other colour helmet shells available - Yellow, Red, Green, Blue and Orange
Conforms to the following Standards
• Anti-static assembly; certified electrostatic-INERIS for use in ATEX/explosive environments
• Electrically insulating helmet meeting EN 397:2012 Industrial safety helmets 440 V AC and EN 50365 Insulating helmets for use on low voltage installations 1000 V AC
• EN166:2001 personal eye equipment 2C-1,2 1 3 B 8-1-0 9 KN
• GS-ET 29 Electric Arc, class 1, 4KA

MSA Reference: GVF1A-80A0000-000