Glovezilla
At Beeswift, we spend time developing and structuring amazing products, including our
new Glovezilla range.
Each glove comes with a retail ready header card. This strong robust card also adopts the same colour size chart
as the outer box and is 100% recyclable.
Each card also comes with its own barcode making it easy for the retailer
to add to their existing system. By adding a colour size chart it is easy to determine which size of Glovezilla glove
you are purchasing.
Easy to read titles on the front of the card, along with technical details for each glove, make
choosing the right product for the job simple.
Translation of the titles and technical information on the rear of
the card make this product perfect for the European markets.
As a company, we are continuing our efforts to ethically source products and reduce waste, whilst producing
products that are fit for purpose and ready to retail. Our outer boxes are all recyclable and we have reduced
our ink coverage.
• 13 Gauge, HPPE, Polyester, Glass Fibre Liner (Available in Green, Orange, Pink, Blue, and Red).
• 100% Foam Nitrile Coating
• 100% TPR Glow in the Dark Back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection
• 13 Gauge, HPPE, Polyester, Glass Fibre Liner (Available in Green, Orange, Pink, Blue, and Red).
• 100% Foam Nitrile Coating
• 100% TPR Glow in the Dark Back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection
• 13 Gauge, HPPE, Polyester, Glass Fibre Liner (Available in Green, Orange, Pink, Blue, and Red).
• 100% Foam Nitrile Coating
• 100% TPR Glow in the Dark Back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection
)
• 13 Gauge, HPPE, Polyester, Glass Fibre Liner (Available in Green, Orange, Pink, Blue, and Red).
• 100% Foam Nitrile Coating
• 100% TPR Glow in the Dark Back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection
)
• Sizes S-XL comes in boxes of 100 pieces.
• Size XXL comes in boxes of 90 pieces.
• Powder Free black textured Nitrile Gloves
• CE category III
• Excellent elasticity
• Textured for added grip
• 7 mil
• EN420: 2003 +A1:2009
• EN 388:2016+A1:2018
• Level 0 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 0 - Tear Resistance
• Level 0 - Puncture Resistance
• Level A - TDM Cut Resistance (ISO 13997)
• EN 374-1:2016
• EN 374-4: 2013
• EN 374-5: 2016
Chemical - Breakthrough Time
n-Heptane(J) - More than 30 Mins (level 2).
Sodium Hydroxide 40%(K) - More than 480 Mins (level 6).
Additional Chemical Test
Ammonia 25% - More than 10 Mins (level 1).
Formaldehyde 37%- More than 480 Mins (level 6).
Hydrogen Peroxide 30% - More than 480 Mins (level 6).
• HPPE 40.9%, Nylon 14.1%, Polyester 15.9%, Glass fibre 21.3%, Spandex 7.8% Liner.
• 100% Nitrile Rubber Coating.
• 100% PVC TPR back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 2 - Puncture Resistance
• Level D - TDM Cut Resistance (ISO 13997)
• Para-Aramid 71.2%, Steel 13.5%, Polyester 10.5%, Spandex 8% Liner.
• 100% Nitrile rubber coating.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 1 - Puncture Resistance
• Level D - TDM Cut Resistance (ISO 13997)
• Nitrile Foam coating
• 15 Gauge - Nylon and Polyester
• Comfortable and breathable for prolonged periods when performing precision tasks
• EN 388: 2016
• Level 4 - Abrasion
• Level X - Cut resistance
• Level 3 - Tear resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• Double coated nitrile offers water and oil resistance
• Wet/dry grip
• Washable and can be tumble dried (Follow instructions)
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level B - ISO 13997 Cut Resistance
• EN 511: 2006
• Level X - Convective Cold
• Level 2 - Contact Cold
• Level X - Water Penetration
• Double coated nitrile
• 13-gauge HPPE/Glass Fiber/Spandex liner
• Wet/dry grip
• Offers fantastic oil and water resistance
• Washable and can be tumble dried (follow instructions)
• EN 388: 2016
• Level 4 - Abrasion
• Level X - Cut resistance
• Level 4 - Tear resistance
• Level 3 - Puncture
• Level D - ISO 13997 Cut Resistance
• Premium Grey split leather.
• Heavyweight cotton backing and safety cuff.
• Para-Aramid lining.
• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 4 - Puncture Resistance
• Level E - TDM Cut Resistance (ISO 13997)
• HPPE 40.9%, Nylon 14.1%, Polyester 15.9%, Glass fibre 21.3%, Spandex 7.8% Liner.
• 100% PU Coating.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 2 - Puncture Resistance
• Level C - TDM Cut Resistance (ISO 13997)
• Premium goatskin Leather with reinforced stitching
• Reinforced Para-aramid Lining
• Thinsulate lined layer
• ARC Flash resistant ASTM F2675/F2675M 56cal/cm2
• ARC Flash Heat attenuation factor 95.7%
• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 2 - Tear Resistance
• Level 3 - Puncture Resistance
• Level D - TDM Cut Resistance (ISO 13997)
• EN 407:2004
• Level 4 - Burning Behaviour
• Level 1 - Contact Heat
• Level 3 - Convective heat
• Level 2 - Radiant heat
• Level X - Small splashes of Molten Metal
• Level X - Large splashes of Molten Metal
• EN 511:2006
• Level X - Convective Cold Resistance
• Level 3 - Contact Cold Resistance
• Level X - Water Penetration
FEATURES
• Dependable grip, excellent flexibility and a comfortable ergonomic shape.
• Puncture-resistant with latex coating
• Lined with two layers of Titan Armour
• Makes a great general-purpose work glove
• ASTM F2878 14.4 newtons of puncture protection (hypodermic needle)
•• The protective area is on the palm side of the glove only••
• EN388: 2016
• Level 2 - Abrasion
• Level X - Cut Resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 4 - Puncture
• Level F - ISO 13997 Cut Resistance
• EN 407: 2004
• Level X - Burning Behaviour
• Level 2 - Contact Heat
• Level X - Convective heat
• Level X - Radiant heat
• Level X - Small splashes of Molten Metal
• Level X - Large splashes of Molten Metal
• Please note: there is no European standard for needle resistance. Current industry practice is to utilize the American Standard ASTM F2878 as a guide, and to allow comparisons between different products. These products are not needle proof. Your own risk assessment therefore needs to be undertaken to decide the suitability of this product.
