•Ergonomically designed natural rubber electrical insulating gloves for all-day safety and comfort
• Natural rubber latex utilises a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity
•Ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue
•Generous flared cuff allows room for clothing
•Smooth-finish for easy donning and doffing
• 360MM / 14” Length
•Used in combination with AN96-002 leather protector to provide mechanical protection (worn over class 00 & 0 only)
•Certified for resistance to acid (Category A), Ozone (Category Z) and very low temperatures (Category C)
•Applications with risk of touch voltage AC maximum 1000 V (DC maximum 1500)
•Electrical Glove Class 0 offers arc flash protection Class 1 in accordance with EN 61482-1-2
•EN 60903:2003 Live working. Gloves of insulating material

• Ergonomically designed natural rubber electrical insulating gloves for all-day safety and comfort
• Natural rubber latex utilises a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity
• Ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue
• Generous flared cuff allows room for clothing
• Smooth-finish for easy donning and doffing
• 410MM / 16” Length
• Used in combination with AN96-003 leather protector to provide mechanical protection (designed for Ansell’s class 1-4 electrical gauntlets only)
• Certified for resistance to acid (Category A), Ozone (Category Z) and very low temperatures (Category C)
• Applications with risk of touch voltage AC maximum 26500 V (DC maximum 39750)
• EN 60903:2003 Live working. Gloves of insulating material

Please note Class 1-4 Electrical insulating gloves are made to order products with MOQs and longer than standard lead time. Consequently, these items are non-cancellable once the order is confirmed.

• Natural rubber glove
• Good mechanical and chemical protection in heavy duty environments
• High resistance to certain water-based chemicals
• Good flexibility and elasticity reducing risk of tears
• Chlorinated to harden and easily cleanse the surface of the glove
• Beaded cuff for easy donning
• 1.5mm Thickness
• AQL 0.65
• 24 INCH (610mm) length
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AKLMPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• EN 388:2016 Protective gloves against mechanical risks 3121B
Abrasion- Level 3
Cut Resistance- Cut B
Tear- Level 2
Puncture- Level 1

• Natural rubber glove
• Good mechanical and chemical protection in heavy duty environments
• High resistance to certain water-based chemicals
• Good flexibility and elasticity reducing risk of tears
• Chlorinated to harden and easily cleanse the surface of the glove
• Beaded cuff for easy donning
• 1.2mm Thickness
• AQL 0.65
• 17 INCH (432mm) length
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AKLMPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• EN 388:2016 Protective gloves against mechanical risks 3121B
Abrasion- Level 3
Cut Resistance- Cut B
Tear- Level 2
Puncture- Level 1

• 7G Brushed polyester heavyweight knitted liner with Latex coated to palm area.
• Double dip to fingers for added protection.
• Vented back
• Highly visible fleese liner.
• Ideal for refrigeration, coldstore, and winter conditions.
• Thick latex coating for durability and grip.

• EN388: 2003
• Level 2 - Abrasion
• Level 2 - Cut Resistance
• Level 4 - Tear Resistance
• Level 1 - Puncture
• Conforms to EN511: 2006 1.4.X
• Conforms to EN407: 2004 X2XXXX

Features
• Electro conductive front finger tips for using touch devices
• Smart fit with durable synthetic leather base palm
• Original synthetic leather vintage puller
• Synthetic leather crotch
• Contrast yellow colour fourchettes and binding

Applications
• Multi-purpose
• Landscaping
• Forestry Lumberyards
• Cable and Wire work
• Maintenance and Repair
• Material Handling

EN388:2003
• Level 2 - Abrasion
• Level 1 - Cut Resistance
• Level 3 - Tear Resistance
• Level 2 - Puncture

• Kutstop system
• 15g HPPE plus fibre and spandex liner
• Black nitrile coated palm
• Excellent dexterity and comfort
• Ideal for the construction industry, automotive industry, electrical industry and handling glass or sheet metal
• Conforms to EN388:2003 - 4,5,4,4

• High quality soft grain leather.
• knitted cotton back.
• Hook and loop cuff fastening.

• EN388: 2003
• Level 2 - Abrasion
• Level 1 - Cut Resistance
• Level 1 - Tear Resistance
• Level 1 - Puncture

• High engineered nylon/Spandex yarn glove.
• Seamless liner.
• PU coating, palm coated.
• High quality cut resistance.
• Excellent dexterity.

• EN388: 2003
• Level 4 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level 3 - Puncture
• Level C - ISO 13997 Cut Resistance

• 100% Nylon seamless shell.
• Nitrile coated palm and fingers.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications

• EN388: 2016
• Level 3 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance

• High performance anti-vibration gloves
• Nylon/cotton knit with natural vulcanised palm and fingertips

• Abrasion resistance level 4
• Cut resistance level 1
• Tear resistance level 4
• Puncture resistance level 2

EN420.
EN388 4.1.4.2.
EN10819:

• Powder Free blue Nitrile Gloves
• CE category III
• CE class I examination glove
• Specially developed formulation and innovative production process
• Excellent elasticity for comfort
• Tested an certified according to 1935/2004 - suitable for food contact
• Free from phthalates/softeners and allergenic latex proteins
• Textured fingers
• Medical device class 1
• AQL 1.5

• EN420: 2003 +A1:2009, EN 374-2: 2003, EN 374-3: 2003, EN455
• EN 388: 2003

• PVC Gauntlet.
• 16" (40cm) overall length.
• Liquid proof.

• EN388: 2003
• Level 3 - Abrasion
• Level 1 - Cut Resistance
• Level 1 - Tear Resistance
• Level 1 - Puncture

• Winter warmers 2 pack
• 3M Thinsulate balaclava and gloves
• Extra thick material

• ProFlex® 925F(x) Dorsal Impact-Reducing Gloves
• Full TPR armor + technical foam for max protection
• Hi-Vis AX Suede + non-slip dot gripping palm
• Armortex- reinforced thumb saddle and index finger
• Hi-vis breathable mesh construction
• Padded neoprene cuff with reflective binding

• Highest needlestick resistance available provided by the layering of SuperFabric® brand material.
• Tested using 25 gauge hypodermic needles.
• Highest level of cut resistance on noted areas; EN388 Cut Level 5.
• Single glove needle solution with incredible dexterity and comfort.
• Wrinkle rubber palm coating with Actifresh anti-microbial treatment.

EN388 4.5.4.4 CE

• Highest needlestick and cut resistance available provided by the layering of SuperFabric brand material on noted enhanced areas, ANSI/ISEA Cut Level A9 and Needlestick Level 5
• 15-gauge hi-vis polyester shell enhances visibility and worker compliance
• SuperFabric® demonstrated injection resistance from apertures ranging from .002" to .012" (0.05 to 0.3 mm) using standard hydraulic
• Sandy nitrile three-quarter knuckle palm coating provides superior grip and abrasion resistance in wet conditions
• Knit wrist helps prevent dirt and debris from entering the glove
• Seamless construction allows enhanced comfort and breathability while maintaining dexterity and tactility

EN 388 4X3F
Needlestick Level 5

• Winter gloves for the handling of frozen products in cold stores and for forklift operators
• Knitted acrylic brushed inside, hi-viz yellow liner
• 3/7 crinkled latex coating
• Enhanced protection against sharp objects
• Shrink roughened surface for excellent grip and heat contact insulation (upto 250 deg C)
• EN407 X2XXXX
• EN388 2231
• EN511 X20

• Coreshield, 13 Gauge HPPE/basalt black liner, nitrile microfoam black coating
• Enhanced cut resistance, comfort, ease of selection
• The washability of the glove material means that even after 5 washing cycles, there are no significant changes in performance or size.
Together, these factors mean that CoreShield™ gloves have a longer life
• Hand and wrist protection
• Touch screen resisitve and capactivie
• All in one glove
• Coreshiled gloves are certified to STANDARD 100 by OEKA-TEX
• Conforms to EN 388 4X43C

• CoreShield, 13 Gauge HPPE/basalt black liner, smooth nitrile black coating
• Enhanced cut resistance, comfort, ease of selection
• The washability of the glove material means that even after 5 washing cycles, there are no significant changes in performance or size.
Together, these factors mean that CoreShield™ gloves have a longer life
• Hand and wrist protection
• Touch screen resistive and capacitive
• All in one glove
• CoreShield gloves are certified to STANDARD 100 by OEKA-TEX
• Conforms to EN 388 4X42E

• Coreshield, 13 Gauge HPPE/basalt black liner, nitrile microfoam black coating
• Enhanced cut resistance, comfort, ease of selection
• The washability of the glove material means that even after 5 washing cycles, there are no significant changes in performance or size.
Together, these factors mean that CoreShield™ gloves have a longer life
• Hand and wrist protection
• Touch screen resistive and capacitive
• All in one glove
• Coreshield gloves are certified to STANDARD 100 by OEKA-TEX
• Conforms to EN 388 4X44F

• CoreShield, 13 Gauge HPPE/basalt black liner, smooth nitrile black coating
• Enhanced cut resistance, comfort, ease of selection
• The washability of the glove material means that even after 5 washing cycles, there are no significant changes in performance or size.
Together, these factors mean that CoreShield™ gloves have a longer life
• Hand and wrist protection
• Touch screen resistive and capacitive
• All in one glove
• CoreShield gloves are certified to STANDARD 100 by OEKA-TEX
• Conforms to EN 388 4X44F

JCB Winter Hat, Work Gloves and Snood Set: Packaged in a branded JCB retail tube

JCB Knitted Beanie Hat for men are built to protect, warm and insulate.
• High wind resistance and insulation - ideal for outdoor site work
• Double layer knit
• Cuffed design
• 100% knitted acrylic
• One size fits all

JCB Snood: This mens scarf is crafted with 100% polyester microfibre
The neck scarf is a multifunctional item, used to protect your neck and face - this black scarf is suited as a face scarf and scarf mask
• Multifunctional headwear item
• Wear it in a variety of ways - head, neck or wrist
• Machine washable and fast drying

Touch Screen Gloves
• Super stretch gloves
• Black with grey touch screen tips
• Ribbed close fitting cuff
• Fully washable
• 85% Acrylic 15% Elastane
• Adult - one size

• Rechargeable Intrinsically safe LED torch
• Patented Advanced Focus System optics for spot (near) or flood (distance) illumination
• Magnetic switch for easier operation - even with gloves on
• Recharge without the need to remove battery from torch housing via a charging dock (supplied)
• Charging indicator light
• IP66 dust/water resistance
• II 2G Ex ib op is IIC T4 Gb
• II 2D Ex ib op is IIIC T135°C Db
• L-ion battery (supplied)
• 7-year with registration warranty for complete peace of mind
• 220 lumens on full beam and 40 lumens on low beam.