• Microfiber knitting
• Single nitrile coating
• 18 gauge nylon
• Breathable
• Mixed spandex
• Oil and wet resistance
• High level abrasion resistance
• EN 388: 2016
• Level 3 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• Nitrile Foam coating
• 15 Gauge - Nylon and Polyester
• Comfortable and breathable for prolonged periods when performing precision tasks
• EN 388: 2016
• Level 4 - Abrasion
• Level X - Cut resistance
• Level 3 - Tear resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• Double coated latex
• 13-gauge napped acrylic liner
• Wet/dry grip
• Extra cold resistance
• EN388: 2016
• Level 1 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 1 - Puncture
• Level B - ISO 13997 Cut Resistance
• EN 511: 2006
• Level 0 - Convective Cold
• Level 1 - Contact Cold
• Level 1 - Water Permeability
• EN 407: 2004
• Level X - Burning Behaviour
• Level 2 - Contact Heat
• Level X - Convective heat
• Level X - Radiant heat
• Level X - Small splashes of Molten Metal
• Level X - Large splashes of Molten Metal
• 18 Gauge knit
• Grey PU palm coating
• UHMWPE liner
• Comfortable ergonomic fit
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 2 - Puncture
• Level E - ISO 13997 Cut Resistance
• Foodsafe (Except for fatty foods)
• 18 Gauge knit
• Grey nitrile palm coating
• HPPE liner
• Comfortable ergonomic fit
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 2 - Puncture
• Level F - ISO 13997 Cut Resistance
• Foodsafe (Except for fatty foods)
• 40% polyester +60% Latex
• High performance anti-vibration gloves
• Available in sizes 8 (M) - 10 (XL)
• EN388: 2016 +A1:2018
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 2 - Puncture
• Level B - ISO 13997 Cut Resistance
EN 10819:2013 +A1:2019
Medium Frequency Spectrum "M" - 0.865 Pass
High Frequency Spectrum "H" - 0.598 Pass
• Sizes S-XL comes in boxes of 100 pieces.
• Size XXL comes in boxes of 90 pieces.
• Powder Free black textured Nitrile Gloves
• CE category III
• Excellent elasticity
• Textured for added grip
• 7 mil Thick (1 mil = 1/1000 of an inch)
• Each glove weighs approx. 7 grams (based on a size large)
• EN ISO 21420: 2020
• EN 388:2016+A1:2018
• Level 0 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 0 - Tear Resistance
• Level 0 - Puncture Resistance
• Level A - TDM Cut Resistance (ISO 13997)
• EN 374-5: 2016
Resistance to Bacteria and Fungi PASS
Resistance to Virus PASS
• EN ISO 374-1:2016+A1:2018
n-Heptane(J) - More than 30 Mins (level 2).
Sodium Hydroxide 40%(K) - More than 480 Mins (level 6).
Ammonium Hydroxide 25%(O) - More than 10 Mins (level 1).
Formaldehyde 37%(T)- More than 480 Mins (level 6).
Hydrogen Peroxide 30%(P) - More than 30 Mins (level 2).
• Ergonomically designed natural rubber electrical insulating gloves for all-day safety and comfort
• Natural rubber latex utilises a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity
•Ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue
• Generous flared cuff allows room for clothing
• Smooth-finish for easy donning and doffing
• 360MM / 14” Length
• Used in combination with AN96-002 leather protector to provide mechanical protection (worn over class 00 & 0 only)
• Certified for resistance to acid (Category A), Ozone (Category Z) and very low temperatures (Category C)
• Applications with risk of touch voltage AC maximum 500 V (DC maximum 750)
• Electrical Glove Class 00 offers arc flash protection (APC 1 when worn in combination with 96-002)
• EN 60903:2003 Live working. Gloves of insulating material
Online Video Training Course Redeem Card
COURSE SUMMARY
INTRODUCTORY FIRST AID TRAINING
Fears of First Aid
Asking Permission to Help
Calling the EMS
Waiting for the EMS to arrive
Scene Safety
Chain of Survival
DRAB and ABCD's
Barriers and Gloves
How to use face shields
Initial Assessment and the recovery position
BSi First Aid Kit
CARDIAC ARREST
Adult CPR Introduction
Heart Attack
Adult CPR
CPR Hand Over
Compression-Only CPR
AED
Drowning
CHOKING TRAINING
Adult Choking
BLEEDING CONTROL
Types of Bleeding
Serious Bleeding
Embedded Objects
Plasters
Other injuries
Minor Injuries
OTHER MEDICAL CONDITIONS
Shock
Dealing with fainting
Allergic Reaction and Anaphylaxis
Spinal Injury
Spinal recovery Position
Burns and Burns kits
Treating a burn
Treating a burn with cling film
Epilepsy
Adult Seizures
REGULATIONS AND SUMMARY
First Aid at Work Rules and Regulations
The Accident Book RIDDOR
Appointed Persons Summaryr service adds clarity to teaching, promotes continuous learning and encourages learners to revisit and revise subjects they have been taught.
Refill Kit for CM0100 Small BS8599 First Aid Kit
For use in:
• Low risk areas up to 20 employees.
• Medium risk areas up to 10 employees.
Kit Contains:
• 1 x Guidance note.
• 1 x Burn relief dressing (10cm x 10cm).
• 40 x Assorted waterproof plasters.
• 2 x Eyepad dressing with sterile bandage.
• 1 x Foil blanket.
• 1 x Large HSE dressing (18cm x 18cm) sterile Flow-wrapped.
• 4 x Medium HSE dressing (12cm x 12cm) sterile Flow-wrapped.
• 6 x Nitrile gloves (pair).
• 1 x Mouth-to-mouth resuscitation device with valve.
• 2 x Finger dressing with adhesive fixing 3.5cm.
• 1 x Conforming bandage 7.5cm x 4m.
• 1 x Microporous tape 2.5cm x 5m.
• 20 x Sterile cleansing wipes.
• 2 x Single use triangular bandage 90cm x 127cm.
• 1 x Universal shears small.
Our range of Body Fluid Spill kits and Sharps handling kits are designed to enable any worker to deal with the problems of body fluids such as blood and vomit and the problem of discarded needles and syringes. These kits are easy to use and address all the issues that are caused by cross contamination and infections caused by Bio Hazards.
The HSE guidance on 'Blood - borne viruses in the workplace' (leaflet INDG342) and there is a provision under COSHH that employers have a legal duty to assess the risk of cross infection for employees and others affected by your work.
Carrying a Click Medical spill or sharps handling kit, will help meet these requirements and increase the confidence of employees, knowing that you as the employer are dealing with the risk attached to biohazards and their control.
Supplied in a small carrying case, this kit contains:
• 1x CM0615 Single Application Body Fluid Spill Kit
• 1x Sharps handling kit comprising of:
• Sharps disposal container, 0.1ltr
• Soft vinyl gloves (1 pair)
• Biohazard bag
• Disinfectant wipe
• Sharps handling forceps
Ideal for small businesses, offices, shops, pubs, restaurants and lone workers where occasional risk may be encountered.
Our range of Body Fluid Spill kits and Sharps handling kits are designed to enable any worker to deal with the problems of body fluids such as blood and vomit and the problem of discarded needles and syringes. These kits are easy to use and address all the issues that are caused by cross contamination and infections caused by Bio Hazards.
The HSE guidance on 'Blood - borne viruses in the workplace' (leaflet INDG342) and there is a provision under COSHH that employers have a legal duty to assess the risk of cross infection for employees and others affected by your work.
Carrying a Click Medical spill or sharps handling kit, will help meet these requirements and increase the confidence of employees, knowing that you as the employer are dealing with the risk attached to biohazards and their control.
Kit Contents :
• 1 x Sharps Disposal Container
• 1 x 50ml disinfectant Spray
• 1 x pair vinyl gloves(large)
• 1 x Biohazard bag
• 1 x Disinfectant wipe
• 1 x pair polypropylene forceps
Our range of Body Fluid Spill kits and Sharps handling kits are designed to enable any worker to deal with the problems of body fluids such as blood and vomit and the problem of discarded needles and syringes. These kits are easy to use and address all the issues that are caused by cross contamination and infections caused by Bio Hazards.
The HSE guidance on 'Blood - borne viruses in the workplace' (leaflet INDG342) and there is a provision under COSHH that employers have a legal duty to assess the risk of cross infection for employees and others affected by your work.
Carrying a Click Medical spill or sharps handling kit, will help meet these requirements and increase the confidence of employees, knowing that you as the employer are dealing with the risk attached to biohazards and their control.
Supplied in grip seal bag, this kit contains:
• 1 x CM0620 Clean Up pack consisting of:
• Instructions
• Soft Vinyl Gloves (1 pair)
• Polythene oversleeves (1 pair)
• Polythene apron
• Polypropylene scoop and scrape
• Biohazard Bag
• Non woven wipe
•Disinfectant wipe
Plus
• 1 x 50ml disinfectant spray
• 1 x Super absorbent powder sachet (10g)
This one application kit is designed to deal with any single application to handle body fluids and can be bought singularly or in bulk as a refill for your kits or as a back up for large, multiple or continuing risks.
Our range of Body Fluid Spill kits and Sharps handling kits are designed to enable any worker to deal with the problems of body fluids such as blood and vomit and the problem of discarded needles and syringes. These kits are easy to use and address all the issues that are caused by cross contamination and infections caused by Bio Hazards.
The HSE guidance on 'Blood - borne viruses in the workplace' (leaflet INDG342) and there is a provision under COSHH that employers have a legal duty to assess the risk of cross infection for employees and others affected by your work.
Carrying a Click Medical spill or sharps handling kit, will help meet these requirements and increase the confidence of employees, knowing that you as the employer are dealing with the risk attached to biohazards and their control.
Supplied in grip seal bag, this kit contains:
• Instructions
• Soft Vinyl Gloves (1 pair)
• Polythene oversleeves (1 pair)
• Polythene apron
• Polypropylene scoop and scrape
• Biohazard Bag
• Non woven wipe
• Disinfectant wipe
This is the basic clean up pack that should be used in conjunction with disinfectant spay and our super absorbent powder
• Extreme resistance against a wide range of chemicals, due to 5 layer laminated glove
• Wing-thumb, hand-specific design provides greater dexterity and reduced hand fatigue
• Each glove is individually air-pressure tested
• Can be worn as a liner under heavier gloves
•Heavyweight PVC supported glove with excellent comfort
•Special nitrile and PVC blend formulation to provide good durability, protection and flexibility, even in low temperatures
㩁-gauge seamless cotton lining for added comfort and protection
•Foam palm providing good oil resistant as well as good grip performance in wet & oily environment
• 300mm length
•Food safe
•EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKLPMT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
•EN 388:2016 Protective gloves against mechanical risks 4131A
•Level 4- Abrasion
•Level 1- Cut Resistance
•Level 3- Tear Resistance
•Level 1- Puncture
•Level A ISO 13997 Cut Resistance
•Heavyweight PVC supported glove with excellent comfort
•Special nitrile and PVC blend formulation to provide good durability, protection and flexibility, even in low temperatures
㩁-gauge seamless cotton lining for added comfort and protection
•Foam palm providing good oil resistant as well as good grip performance in wet & oily environment
• 380mm length
•Food safe
•EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKLPMT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
•EN 388:2016 Protective gloves against mechanical risks 4131A
•Level 4- Abrasion
•Level 1- Cut Resistance
•Level 3- Tear Resistance
•Level 1- Puncture
•Level A ISO 13997 Cut Resistance
• Heightened defences: HyFlex 11-250 arm protection sleeves’ INTERCEPT Cut Resistance Technology delivers ANSI A3 and EN ISO B cut protection
• Elevated comfort: Their seamless HPPE yarn offers users a cool, breathable feel, while their bicep cuff keeps them securely in place
• Reduced contaminant risks: The risk of contaminant transfer to metal before painting is reduced, as they are silicone-free
• Added practicality: The HyFlex 11-250’s overedges come in red, black or light blue, for narrow, wide or extra-wide
• Certified harm-free: Oeko-Tex certification indicates they are free of substances harmful to human health
• INTERCEPT Liner
• Knitwrist cuff style without thumb slot
• 12- (30cm) length
• Narrow
• Food Safe
• EN 388:2016 Protective gloves against mechanical risks 2X42B
•Sold as 50 singles
• Heightened defences: HyFlex 11-250 arm protection sleeves’ INTERCEPT Cut Resistance Technology delivers ANSI A3 and EN ISO B cut protection
• Elevated comfort: Their seamless HPPE yarn offers users a cool, breathable feel, while their bicep cuff keeps them securely in place
• Reduced contaminant risks: The risk of contaminant transfer to metal before painting is reduced, as they are silicone-free
• Added practicality: The HyFlex 11-250’s overedges come in red, black or light blue, for narrow, wide or extra-wide
• Certified harm-free: Oeko-Tex certification indicates they are free of substances harmful to human health
• INTERCEPT Liner
• Knitwrist cuff style without thumb slot
• 16" (40cm) length
• Narrow
• Food Safe
• EN 388:2016 Protective gloves against mechanical risks 2X42B
• Sold as 50 singles
• Heightened defences: HyFlex 11-250 arm protection sleeves’ INTERCEPT Cut Resistance Technology delivers ANSI A3 and EN ISO B cut protection
• Elevated comfort: Their seamless HPPE yarn offers users a cool, breathable feel, while their bicep cuff keeps them securely in place
• Reduced contaminant risks: The risk of contaminant transfer to metal before painting is reduced, as they are silicone-free
• Added practicality: The HyFlex 11-250’s overedges come in red, black or light blue, for narrow, wide or extra-wide
• Certified harm-free: Oeko-Tex certification indicates they are free of substances harmful to human health
• INTERCEPT Liner
• Knitwrist cuff style without thumb slot
• 12" (30cm) length
• Wide
• Food Safe
• EN 388:2016 Protective gloves against mechanical risks 2X42B
• Heightened defences: HyFlex 11-250 arm protection sleeves’ INTERCEPT Cut Resistance Technology delivers ANSI A3 and EN ISO B cut protection
• Elevated comfort: Their seamless HPPE yarn offers users a cool, breathable feel, while their bicep cuff keeps them securely in place
• Reduced contaminant risks: The risk of contaminant transfer to metal before painting is reduced, as they are silicone-free
• Added practicality: The HyFlex 11-250’s overedges come in red, black or light blue, for narrow, wide or extra-wide
• Certified harm-free: Oeko-Tex certification indicates they are free of substances harmful to human health
• INTERCEPT Liner
• Knitwrist cuff style without thumb slot
• 16" (40cm) length
• Wide
• Food Safe
• EN 388:2016 Protective gloves against mechanical risks 2X42B
• Sold as 50 singles
• Heightened defences: HyFlex 11-251 arm protection sleeves’ INTERCEPT Cut Resistance Technology delivers ANSI A3 and EN ISO B cut protection
• Elevated comfort: A seamless HPPE yarn grants wearers a cool, breathable feel, while a thumb slot and bicep cuff hold them firmly in place
• Reduced contaminant risks: The risk of contaminant transfer to metal before painting is reduced, as they are silicone-free
• Added practicality: The HyFlex 11-251’s overedges come in red, black or light blue, for narrow, wide or extra-wide
• Certified harm-free: Oeko-Tex certification indicates they are free of substances harmful to human health
• INTERCEPT Liner
• Knitwrist cuff style with thumb slot
• 12 (30cm) length
• Narrow
• Food Safe
• EN 388:2016 Protective gloves against mechanical risks 2X42B
• Sold as 50 singles
• Heightened defences: HyFlex 11-251 arm protection sleeves’ INTERCEPT Cut Resistance Technology delivers ANSI A3 and EN ISO B cut protection
• Elevated comfort: A seamless HPPE yarn grants wearers a cool, breathable feel, while a thumb slot and bicep cuff hold them firmly in place
• Reduced contaminant risks: The risk of contaminant transfer to metal before painting is reduced, as they are silicone-free
• Added practicality: The HyFlex 11-251’s overedges come in red, black or light blue, for narrow, wide or extra-wide
• Certified harm-free: Oeko-Tex certification indicates they are free of substances harmful to human health
• INTERCEPT Liner
• Knitwrist cuff style with thumb slot
• 16" (40cm) length
• Narrow
• Food Safe
• EN 388:2016 Protective gloves against mechanical risks 2X42B
• Sold as 50 singles
• Heightened defences: HyFlex 11-251 arm protection sleeves’ INTERCEPT Cut Resistance Technology delivers ANSI A3 and EN ISO B cut protection
• Elevated comfort: A seamless HPPE yarn grants wearers a cool, breathable feel, while a thumb slot and bicep cuff hold them firmly in place
• Reduced contaminant risks: The risk of contaminant transfer to metal before painting is reduced, as they are silicone-free
• Added practicality: The HyFlex 11-251’s overedges come in red, black or light blue, for narrow, wide or extra-wide
• Certified harm-free: Oeko-Tex certification indicates they are free of substances harmful to human health
• INTERCEPT Liner
• Knitwrist cuff style with thumb slot
• 18" (45cm) length
• Narrow
• Food Safe
• EN 388:2016 Protective gloves against mechanical risks 2X42B
• Sold as 50 singles
-
314 Products
