Gloves — Cut Resistant
• 90% reinforced fiber + 10% PVC
• Medium weight fingerless latex dotted glove.
• Extra density blended yarn.
• Offers exceptional cut protection.
• Good dexterity and comfort to the user.
• Ideal to handle both large and small hazardous components.
• Dotted both sides.
• EN388: 2016
• Level 1 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level X - Puncture
• Level B - ISO 13997 Cut Resistance
• 100% reinforced fiber
• Lightweight cut resistant glove.
• Exceptional dexterity for safe handling of the smallest components.
• Extremely successful used as a glove liner in conjunction with traditional
work gloves.
• Used this way it can provide additional protection should the outer glove
incur laceration.
• EN388: 2016
• Level 1 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level X - Puncture
• Level A - ISO 13997 Cut Resistance
• 90% reinforced fiber + 10% PVC
• Medium weight glove.
• Extra density yarn.
• High level cut protection without the loss of dexterity
• Comfortable for the wearer.
• Ideal where there is a requirement to handle both large and small
hazardous components.
• EN388: 2016
• Level 1 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level X - Puncture
• Level B - ISO 13997 Cut Resistance
• 40% reinforced fiber + 60% Latex
• Reinforced knitted glove latex coated palm
• High cut resistancy.
• Comfortable, allows hand to breathe through back.
• Excellent grip.
• EN388: 2016
• Level 3 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level 4 - Puncture
• Level D - ISO 13997 Cut Resistance
• Cut B amber cut protection
• 13g HPPE plus nylon liner
• Black nitrile coated palm
• Excellent dexterity and comfort
• Construction industry, automotive industry, electrical industry and handling materials with sharp edges
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 2 - Puncture
• Level B - ISO 13997 Cut Resistance
• 14" (35cm) Reinforced sleeve with thumb slot.
• 100% reinforced fiber
• Excellent cut resistance.
• Soft and comfortable against the arm during use.
• Extremely lightweight elasticated style allows the sleeve to
remain in place during the most rigorous tasks.
•Thumb slot is added to further ensure that the product remains
in place.
• Ideal in industries where laceration risks to the arms are prominent.
• Sold as singles.
• EN388: 2016
• Level 1 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level X - Puncture
• Level B - ISO 13997 Cut Resistance
• Kutstop system
• 15g HPPE plus glass fibre and spandex liner
• Black nitrile coated palm
• Excellent dexterity and comfort
• Ideal for the construction industry, automotive industry, electrical industry and handling glass or sheet metal
• EN ISO 21420:2020
• EN388: 2016+A1:2018
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 4 - Puncture
• Level C - ISO 13997 Cut Resistance
• 18" (45cm) Reinforced sleeve with thumb slot.
• 100% reinforced fiber
• Excellent cut resistance.
• Soft and comfortable against the arm during use.
• Extremely lightweight elasticated style allows the sleeve to
remain in place during the most rigorous tasks.
•Thumb slot is added to further ensure that the product remains
in place.
• Ideal in industries where laceration risks to the arms are prominent.
• Sold as singles.
• EN388: 2016
• Level 1 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level X - Puncture
• Level B - ISO 13997 Cut Resistance
• Cut resistant Nylon/Spandex glove.
• Nitrile micro foam palm coating.
• Dexterity with comfort.
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 3 - Puncture
• Level B - ISO 13997 Cut Resistance
• 65% UHMWPE(Ultra high molecular weight polyethylene) + 35%PU
• 13 Gauge Seamless liner.
• PU coating, palm coated.
• High quality cut resistance.
• Excellent dexterity.
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 3 - Puncture
• Level C - ISO 13997 Cut Resistance
• HPPE 40.9%, Nylon 14.1%, Polyester 15.9%, Glass Fibre 21.3%, Spandex 7.8% Liner.
• 100% Nitrile rubber coating.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications
• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 2 - Puncture Resistance
• Level C - TDM Cut Resistance (ISO 13997)
• HPPE 47.4%, Polyester 20.1%, Glass Fibre 17.2%, Steel 14%, Spandex 1.3%.
• Food Safe and washable.
• Extremely high cut protection.
• Suitable for general food preparation and areas where high cut protection is needed.
• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 2 - Puncture Resistance
• Level F - TDM Cut Resistance (ISO 13997)
• 18 Gauge knit
• Grey nitrile palm coating
• HPPE liner
• Comfortable ergonomic fit
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 2 - Puncture
• Level F - ISO 13997 Cut Resistance
• Foodsafe (Except for fatty foods)
• 100% Para-Aramid Liner.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 1 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 2 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)
• EN ISO 11612: 2015
• A1 - Limited Flame Spread (Method A)
• F2 - Contact Heat (250C for between 10 to 15 Seconds)
• 100% Para-Aramid Liner.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 1 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 2 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)
• EN ISO 11612: 2015
• A1 - Limited Flame Spread (Method A)
• F2 - Contact Heat (250C for between 10 to 15 Seconds)
• 100% Para-Aramid Liner.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 1 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 2 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)
• EN ISO 11612: 2015
• A1 - Limited Flame Spread (Method A)
• F2 - Contact Heat (250C for between 10 to 15 Seconds)
• 13 Gauge Liner.
• 20% UHMW PE+ 80% rubber
• 100% TPE Fully Injection coating.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 2 - Puncture Resistance
• Level D - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection
• Liner : High-performance 13-gauge knit for enhanced strength, flexibility and high cut resistance
• Coating : Black polyurethane (PU) palm coating for excellent grip, abrasion resistance, and durability.
• RTC: Reinforced thumb crotch to provide additional protection and extended glove lifespan in high-wear areas.
• Highest cut level F protection in accordance with ISO 13977
• Contact heat resistance performance level 1 in accordance with EN407
• Packaging 10 pairs per pack, securely held together with a paper sleeve.
Standards :
EN 388:2016+A1:2018
• Level 4 - Abrasion
• Level X - Cut resistance
• Level 4 - Tear
• Level 4 - Puncture
• Level F - ISO 13997 Cut Resistance
EN 407: 2020 X1XXXX : Contact Heat Level 1
EN ISO 21420:2020+A1:2024 : Deterity Level 5
• Liner : High-performance 13-gauge knit for enhanced strength, flexibility and high cut resistance
• Coating : Black crinkle latex palm coating for excellent grip on dry, wet, and slightly oily surfaces.
• RTC: Reinforced thumb crotch design to provide additional protection and extended glove lifespan in high-wear areas.
• Highest cut level F protection in accordance with ISO 13977
• Contact heat resistance performance level 1 in accordance with EN407
• Packaging 10 pairs per pack, securely held together with a paper sleeve.
Standards :
EN 388:2016+A1:2018
• Level 3 - Abrasion
• Level X - Cut resistance
• Level 4 - Tear
• Level 3 - Puncture
• Level F - ISO 13997 Cut Resistance
EN 407: 2020 X1XXXX : Contact Heat Level 1
EN ISO 21420:2020+A1:2024 : Deterity Level 5
• Liner : High-performance 13-gauge knit for enhanced strength, flexibility and high cut resistance
• Coating: Nitrile foam palm coating for excellent grip, flexibility, and abrasion resistance.
• Nitrile coating provides improved resistance to oils, greases, fuels and mild chemicals.
• RTC: Reinforced thumb crotch design to provide additional protection and extended glove lifespan in high-wear areas.
• Highest cut level F protection in accordance with ISO 13977
• Contact heat resistance performance level 1 in accordance with EN407
• Packaging 10 pairs per pack, securely held together with a paper sleeve.
Standards :
EN 388:2016+A1:2018
• Level 4 - Abrasion
• Level X - Cut resistance
• Level 4 - Tear
• Level 3 - Puncture
• Level F - ISO 13997 Cut Resistance
EN 407: 2020 X1XXXX : Contact Heat Level 1
EN ISO 21420:2020+A1:2024 : Dexterity Level 5
• Liner: High-performance 18-gauge liner provides a thinner, more tactile fit compared to 13-gauge gloves
enhancing hand movement, grip control, and all-day comfort while maintaining the highest cut resistance.
• Coating : Black polyurethane (PU) palm coating for excellent grip, abrasion resistance, and durability.
• RTC: Reinforced thumb crotch design to provide additional protection and extended glove lifespan in high-wear areas.
• Highest cut level F protection in accordance with ISO 13977
• Contact heat resistance performance level 1 in accordance with EN407
• Touchscreen compatible
• Packaging 1 pair header carded.
Standards :
EN 388:2016+A1:2018
• Level 4 - Abrasion
• Level X - Cut resistance
• Level 4 - Tear
• Level 2 - Puncture
• Level F - ISO 13997 Cut Resistance
EN 407: 2020 X1XXXX : Contact Heat Level 1
EN ISO 21420:2020+A1:2024 : Deterity Level 5
• Heightened defences: HyFlex 11-250 arm protection sleeves’ INTERCEPT Cut Resistance Technology delivers ANSI A3 and EN ISO B cut protection
• Elevated comfort: Their seamless HPPE yarn offers users a cool, breathable feel, while their bicep cuff keeps them securely in place
• Reduced contaminant risks: The risk of contaminant transfer to metal before painting is reduced, as they are silicone-free
• Added practicality: The HyFlex 11-250’s overedges come in red, black or light blue, for narrow, wide or extra-wide
• Certified harm-free: Oeko-Tex certification indicates they are free of substances harmful to human health
• INTERCEPT Liner
• Knitwrist cuff style without thumb slot
• 12- (30cm) length
• Narrow
• Food Safe
• EN 388:2016 Protective gloves against mechanical risks 2X42B
•Sold as 50 singles
• Heightened defences: HyFlex 11-250 arm protection sleeves’ INTERCEPT Cut Resistance Technology delivers ANSI A3 and EN ISO B cut protection
• Elevated comfort: Their seamless HPPE yarn offers users a cool, breathable feel, while their bicep cuff keeps them securely in place
• Reduced contaminant risks: The risk of contaminant transfer to metal before painting is reduced, as they are silicone-free
• Added practicality: The HyFlex 11-250’s overedges come in red, black or light blue, for narrow, wide or extra-wide
• Certified harm-free: Oeko-Tex certification indicates they are free of substances harmful to human health
• INTERCEPT Liner
• Knitwrist cuff style without thumb slot
• 16" (40cm) length
• Narrow
• Food Safe
• EN 388:2016 Protective gloves against mechanical risks 2X42B
• Sold as 50 singles
• Heightened defences: HyFlex 11-250 arm protection sleeves’ INTERCEPT Cut Resistance Technology delivers ANSI A3 and EN ISO B cut protection
• Elevated comfort: Their seamless HPPE yarn offers users a cool, breathable feel, while their bicep cuff keeps them securely in place
• Reduced contaminant risks: The risk of contaminant transfer to metal before painting is reduced, as they are silicone-free
• Added practicality: The HyFlex 11-250’s overedges come in red, black or light blue, for narrow, wide or extra-wide
• Certified harm-free: Oeko-Tex certification indicates they are free of substances harmful to human health
• INTERCEPT Liner
• Knitwrist cuff style without thumb slot
• 12" (30cm) length
• Wide
• Food Safe
• EN 388:2016 Protective gloves against mechanical risks 2X42B
