• Meets EN14683:2019 Type II
• Type II Surgical Facemasks have three ply construction, manufactured from high quality, soft polypropylene materials for enhanced breathability and protection.
• The mask is ideal for extended procedures due to its high comfort and easy breathability.
• A full-width nose piece guarantees a proper fit.
• Mask provides protection from light and moderate fluid.
• Face masks are regulated under the Medical Devices Directives 93/42 EEC as Class 1 Medical Device.
• Precautions: These masks are not designed to provide respiratory protection.
• Store in a cool dry place out of direct sunlight.

• Supplied 50 masks to a pack, 40 packs to an outer case
• MOQ 1 case = 2000 masks

COVID-19 Exceptional Trade - Community mask.

• Reusable cotton face mask
• Nose support integrated in the upper part (nasal clip for easy adjustment)
• Washable at 60 degrees up to 25 washes
• Minimal risk use only

EN 14683: 2019
Bacterial filtration efficiency 87% (Level 3)

The test results confirm that the mask is in compliance with the technical requirements of breathability and bacterial filtration efficiency specified for community masks in the context of COVID-19:
Level 3 - Community Mask
Size (adult/child): Adult
Washes: 25

•••Masks classed as Level 3 are not medical devices and therefore must not be used by heath care professionals.

•For use in all medical, hospital and working environments
• Dual non woven inner and outer layers, complete with non woven filter for combined three layered construction
• Earloop fastenings
• 50 masks to a pack, 40 packs to a carton, MOQ : 1 Carton(2000 face masks)
• Class 1 Medical Device, meeting the essential requirements of the MDD
• Tested and complaint to BS EN 14683 : 2019, Type IIR
• Filtration > 98%, with added fluid resistance
• Individually packed for added protection

3M 2135 P3R Particulate Filters.

Stand alone, lightweight particulate filters
• Lightweight
• Low breathing resistance
• Bayonet fitting system ensures precise and safe locking
• Versatility: can be used on all 3M 6000, 7000 and 7500 Series Half Masks and Full Face Masks
• Maximum use concentration: 20xWEL (half mask) or 40xWEL (full face mask)
• Standard: EN143 
• Approval: CE marked
• Workplace Exposure Limit
1 BOX = 20 FILTERS (NOT PAIRS)

3M 2138 P3R (nuisance level organic vapour and acid gas) particulate filters.
Stand alone, lightweight particulate filters
• Lightweight
• Low breathing resistance
• Bayonet fitting system ensures precise and safe locking
• Versatility: can be used on all 3M 6000, 7000 and 7500 Series Half Masks and Full Face Masks
1 BOX = 20 FILTERS (NOT PAIRS)

The 3M 5935 P3R Particulate Filter protects against solids and liquid particles. Suitable for 3M 6000 and 3M 7000 Series Half Face and Full Face Masks.
Typical industrial applications for filters are pharmaceutical, powdered chemicals, construction, quarrying ceramics, refractory materials, foundries, agriculture, woodworking and food industry.

Standard: EN143
Approval: CE marked

1 BOX = 20 FILTERS (NOT PAIRS)

3M Particulate Filter 6035 protects against solids and liquid particles P3R, where excess levels of particulates are present in the workplace atmosphere. Supplied with plastic cage for rough applications.

• Solid top design reduces chance of premature clogging
• Unique easy to check seal promotes enhanced respirator fit
• High temperature cover protects filter media from heat, sparks or physical damage.
• Bayonet fitting ensures precise & safer locking
• Versatility: can be used on all 3M 6000, 3M 7000 & 3M 7500 Series Half
Masks and Full Face Masks
• Lightweight - 35g each (nominal)
• Low breathing resistance
• Tested and meets specifications to AS/NZS 1716:2003 Class P3 particulate filter when used with compatible 3M respirators.
• Re-usable
• FFP3 Filter
• EN143 : 2000
1 BOX = 20 FILTERS (NOT PAIRS)

3M 6051 A1 Filters protect against organic gases and vapours.

Filters are specially designed and shaped to give "swept-back" position to enable excellent field of vision and balance.

• Lightweight
• Low breathing resistance
• Well balanced when fitted to a mask
• Provides excellent field of vision as a result of the unique trapezoidal shape
• Bayonet fitting system ensures precise and secure locking
• Versatility: can be used on all 6000, 7000 and 7500 Series half masks and full face masks
• 6000 series gas and vapour filters can be used in combination with the 3M 5000 Particulate Filters to provide combined particulate and vapour protection.
• 6096, 6098 and 6099 filters include a P3 particulate filter

Standard: EN14387
Approval: CE marked
1 BOX = 8 FILTERS (NOT PAIRS)

The 3M 6057 ABE1 Filters protect against organic vapours, inorganic vapours and acid gases.

Filters are specially designed and shaped to give "swept-back" position to enable excellent field of vision and balance.
• Lightweight
• Low breathing resistance
• Well balanced when fitted to a mask
• Provides excellent field of vision as a result of the unique trapezoidal shape
• Bayonet fitting system ensures precise and secure locking
• Versatility: can be used on all 6000, 7000 and 7500 Series half masks and full face masks
• 6000 series gas and vapour filters can be used in combination with the 3M 5000 Particulate Filters to provide combined particulate and vapour protection.
• 6096, 6098 and 6099 filters include a P3 particulate filter

Standard: EN14387
Approval: CE marked

1 BOX = 8 FILTERS (NOT PAIRS)

3M 6059 Filters

ABEK1 Filter

Compatible with 3M 6000 & 7500 series full and half face masks

EN Standard - EN141

Hazard - Organic Vapours, Inorganic, Acid gases and Ammonia

1 BOX = 8 FILTERS (NOT PAIRS)

The 6000 Series Reusable Half Masks are economical, low-maintenance, simple to handle and extremely lightweight.

• 6000 series half masks by 3M can also be used with 3M? Supplied Air Systems for your increased convenience and flexibility.
• Head harness with cradle suspension for comfortable fit
• Lightweight elastomeric material for comfort during long periods of work.
• Low profile design minimises interference with field of view
• Twin filter design provides lower breathing resistance.
• EN 140:1998

The extremely lightweight 6000 series full face masks feature a wide field of vision, and low maintenance design for maximum comfort and simplicity of use.

• Extremely lightweight - 450gms (without filters)
• Wide field of vision
• Polycarbonate lens is impact resistant to EN166:B
• 3M Cool Flow Valve allows exhaled air to escape quickly and easily for improved wearer comfort
• Soft, hypo-allergenic elastomeric face piece
• Four strap suspension, easy to put on and take off
• Speech transmission zone
• Unique 3M bayonet filter fixing system
• Standard: EN136

3M 8810 Cup-Shaped Respirator - FFP2

Provides respiratory protection against moderate levels of fine dusts and mists.

Additional Information
• Reliable, effective protection against fine particulates
• Durable collapse resistant inner shell
• Excellent fit over a wide range of face sizes provided by convex shape, nose clip and twin-strap design
• Comfortable, lightweight off-the-face design
• Blue colour coded straps denoting FFP2 protection level.

Standard: EN149:2001 FFP2
Approval: CE Marked
Maximum use level: Assigned Protection Factor: 10 x WEL (Nominal Protection Factor 12 x WEL)

3M 8822 Cup-Shaped Respirator (Valved) - FFP2

Provides respiratory protection against moderate levels of fine dusts and mists.

Additional Information
• 3M Cool Flow valve reduces heat build up to offer comfortable protection, particularly in hot and humid conditions.
• Reliable, effective protection against fine particulates.
• Durable collapse resistant inner shell.
• Excellent fit over a wide range of face sizes provided by convex shape, nose clip and twin-strap design.
• Comfortable, light weight off-the-face design.
• Blue colour coded straps denoting FFP2 protection level.

Standard: EN149:2001 FFP2
Approval: CE Marked
Maximum use level: Assigned Protection Factor: 10 x WEL (Nominal Protection Factor 12 x WEL)

This half facepiece was designed with the wearer in mind. Its soft sealing surface, along with a uniquely designed, 3M Cool Flow Exhalation Valve, enhances wearer comfort and face fit. It's made from a durable silicone and can be used with any of the 3M Filters and Cartridges, Series 2000, 5000, 6000 and 7093.

Features and Benefits

• New cool flow exhalation valve designed to help make breathing easier; also helps to reduce heat and moisture build up in mask.
• Durable and heat resistant, made from soft resilient silicone and heat-resistant.
• New soft seal design; advanced silicone material provides a softer feel on the face.
• Unique adjustments design helps to reduce tension and pressure points on the face providing unsurpassed comfort and helps reduce ring around the nose.
• Dual-mode head harness design adjust easily allowing user the option of wearing the respirator in either the traditional, or drop down mode.

Unique "Big Eye" design provides very low breathing resistance due to the increased filtration area.
• Polypropylene (P.P) outer layer provides smooth lining and avoids loose fibres.
• Embossed fringe seal avoids fluffy open layers around the edges.
• Adjustable head strap ensures the best facial seal with minimum leakage.
• Contour design ensures the compatibility of glasses/goggles reducing fogging.
• Full facial close-cell foam and adjustable nosepiece ensures increased worker comfort and acceptance.
• Protection level FFP3 with exhalation valve.

• Conforms to EN149:2001 + A1:2009 FFP3 NR

For Hazard Type: Toxic dusts, fumes and water-based mists.
Example: Working with hardwood, glass fibres and plastic (non PVC), metalwork and welding.

• Vertical fold flat design.
• Latex free synthetic rubber head strap.
• Comfortable face fit.
• Low breathing resistance.

• Conforms to EN149:2001 + A1:2009 FFP2 NR

For Hazard Type: Toxic dusts, fumes and water-based mists.
Example: Working with hardwood, glass fibres and plastic (non PVC) and some metalwork.

• Pre-assembled ready mask c/w ABEK filters
• Face piece produced from soft non-allergic TPE material
• Provides excellent fit to aid with protection
• Low profile design offers improved field of vision
• Soft adjustable straps ensures a perfect fit to a wide range of contours
• Can be fitted with A1, ABEK and P3 filter cartridges.
• Gas filters can be fitted with replaceable pre-filters and retainer adapters.
• Provided filters for protection against organic gases and vapours with boiling point >65c inorganic gases and vapours sulphur dioxide ammonia and organic ammonia derivatives.
• Half Mask Conforms to EN140:1998
• Filters Conform to EN14387:2001

DuPont Tychem® C, model CHA5. Hooded coverall.
Available in bright yellow for high visibility.

• Elasticated face, wrists, waist and ankles for an optimal fit, thumb loops prevent sleeves from riding up.
• Self-adhesive chin flap for tight seal of suit to face-masks.
• Made from a lightweight and durable fabric (<450g per garment).

Tychem® C garments utilise the strength of Tyvek® and a polymeric barrier coating to offer good permeation barrier protection against a wide range of inorganic chemicals and biological hazards (even under pressure).
Tychem® C is used for splash or pressurised splash protection in a variety of industrial environments, including pulp and paper manufacturing, food processing, chemical processing and pharmaceutical manufacturing.

Chemical protective clothing, Category III, Type 3-B, 4-B, 5-B and 6-B
EN 14126 (barrier to infective agents), EN 1073-2 (protection against radioactive contamination)
Antistatic treatment (EN 1149-5) - on inside
Stitched and over-taped seams with barrier tape for protection and strength.
Self-adhesive double zipper flap closure system for higher protection.

Respiratory folding masks in a Single bag.
FFP2V.

• Exhalation valve for optimum comfort
• Folded mask fo optimum storage space
• Low-profile shape: perfect vision.
• Wraparound shape: large filter surface and increased comfort.
• No staples: no risk of irritation.
• Coloured nose-bridge: easy adjustment and instant identification of the level of protection.
• Willtech seal: hypoallergenic, anti-perspirant, better comfort.
• Individual reusable bag: protects the mask before use and during breaks.
• No pvc, Silicone, latex and Staples: greener.

•NR = Non reusable - ••D = tested using Dolomite

FFPak FFP storage bag with zip closure and carabiner clip.

Suitable for use with;
• 1 x Air Plus FFP Mask
• 2 x Air FFP Masks or up to
• 3 x Classic or Smart FFP Masks

This dual purpose mask is ideally suited to most industrial applications.

The ActivForm® seal automatically adjusts to different face shapes without the need for a nose clip.

The loop strap allows easy application and the DuraMesh® shell increases shape retention and durability.

Durable and comfortable.

FFP1 NR D non-valved

EN149:2001 + A1:2009