• These food-processing gloves offer an engineered fit to allow an optimum balance of fit and flexibility both on its own or as an over glove
• 8mil/0.2mm thickness allows dexterity and tactility without a loss of durability
• Nitrile Rubber (NBR) offering protection against light acids, greases, oils and liquids
• The latex-free formulation of these meat-processing gloves presents no risk of Type 1 allergies
• Reverse lozenge grip design
• Unflocked to prevent the risk of food contamination
• Long cuff extends to the forearm
• 12.2 “(310mm) Length
• Green, 37-300 and Yellow, 37-320 Variants available upon request
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• EN 421 Protective gloves against ionizing radiation and radioactive contamination
• ISO 18889:2019 Protective gloves for pesticide operators and re-entry workers. Performance requirements
• EN 388:2016 Protective gloves against mechanical risks 2001X
• Abrasion- Level 2
• Cut Resistance- X
• Tear- 0
• Puncture- Level 1

Chemical-resistant glove with a unique multi-layer design for broader protection

•Maximized protection: AlphaTec 53-001 safety gloves’ MICROCHEM multi-layer nitrile and neoprene protective barrier ensures EN 374 type A chemical defences and protection from acids and hydrocarbons

•Enhanced grip: ANSELL GRIP coating offers secure grip for wet or oily components

•Elevated comfort: AlphaTec 53-001 chemical gloves’ soft nylon inner liner grants them a comfortable feel

•Considered aesthetics: Their black cuff design makes them perfect for dirt-prone outdoor application

•Certified skin-friendly and harm-free: Oeko-Tex certification ensures they contain no substances harmful to human health

• Improved durability: AlphaTec 53-001 industrial gloves’ multi-layer coating is also abrasion resistant, achieving EN and ANSI level 3 abrasion resistance

• 350mm length
•EN 407 Protective gloves against thermal risks X1XXXX
•EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, ACFGJKLMNOPST
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
•EN 388:2016 Protective gloves against mechanical risks 3121A
•Level 3- Abrasion
•Level 1- Cut Resistance
•Level 2- Tear Resistance
•Level 1- Puncture
•Level A- ISO 13997 Cut Resistance

The ideal solution to mitigate static build up when working with chemicals and liquids in environments with static hazards or high explosive risks

•Nitrile barrier provides advanced chemical protection from many frequently used chemicals.
•Unique Nitrile composition which allows effective dissipation of static build up. Vertical resistance <1x10⁸
•High performance Nitrile compound offers a far superior snag, puncture and abrasion protection compared with rubber or Neoprene gloves
•Reverse lozenge palm finish for improved dry/wet grip
•Foldable cuff gutter to prevent dripping on the forearm
•Antistatic flocking layer for ease of donning/doffing and moisture management
• 330mm length
•EN 16350:2014 Protective gloves. Electrostatic properties
•EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLOPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
•EN 388:2016 Protective gloves against mechanical risks 4101X
•Level 4- Abrasion
• Level 1- Cut Resistance
• Level 0- Tear Resistance
• Level 1- Puncture
•Level X- ISO 13997 Cut Resistance

AlphaTec® 58-005 is an evolution in chemical glove protection whilst making advancements in ergonomics to ensure exceptional fit, feel and tactility. Providing incredible durability and versality alongside a supported nylon liner for comfort, the AlphaTec® 58-005 is the perfect chemical glove for acids, hydrocarbons, fats, oils amongst many others.

• Unique Nitrile/Neoprene blend provides enhanced chemical permeation and degradation resistance
• Ansell Grip Technology for the handling of wet or oily parts providing enhanced dexterity, grip and comfort
• Optimized fit that integrates the nylon liner into the nitrile and neoprene shell for better dexterity & tactility versus double gloving
• Cuff can be folded to act as a gutter to prevent chemicals running down the arm
• 13.8” (350mm) length
• EN 407 Protective gloves against thermal risks X1XXXX
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLMNOPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• EN 388:2016 Protective gloves against mechanical risks 4122A
• Level 4- Abrasion
• Level 1- Cut Resistance
• Level 2- Tear Resistance
• Level 2- Puncture
• Level A- ISO 13997 Cut Resistance

AlphaTec® 58-008 delivers chemical protection with the advantage of extended length protection covering the full arm. Designed for applications with a high splash risk or full immersion. AlphaTec® 58-008’s full length is 100% nitrile, offering the same protection at the fingertip to the end of the cuff

• Nitrile polymer for excellent mechanical protection as well as resistance to oils, fats, greases and hydrocarbons
• Lozenge grip for enhance grip in dry and wet conditions
• Optimized fit that integrates the nylon liner into the nitrile and neoprene shell for better dexterity & tactility versus double gloving
• Excellent dry & wet grip enhance dexterity and reduce hand fatigue
• Wide cuff to allow donning over protection clothing
• 25.2” (640mm) length
• Food safe
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLOT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• EN 388:2016 Protective gloves against mechanical risks 4102X
• Level 4- Abrasion
• Level 1- Cut Resistance
• Level 0- Tear Resistance
• Level 2- Puncture
• Level X- ISO 13997 Cut Resistance

• AlphaTec AQUADRI gloves are engineered with a unique moisture management technology that keeps hands dryer, for significantly longer periods of time.
• The design features a two-layered coating construction with a superior nitrile film for advanced chemical protection and an inner soft foam coating, making a difference especially when sweaty hands are a problem, resulting in an improved user comfort and performance.
•Patented AQUADRI technology brings a unique performance in moisture management that significantly reduces sweat build up inside the glove under hot & humid environments.
•High performance nitrile compound offers a far superior snag, puncture and abrasion protection compared with rubber or neoprene gloves
•Reverse lozenge palm finish for improved dry/wet grip
•Foldable cuff gutter to prevent dripping on the forearm
• 320mm length
•Food safe
•EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKLOPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
•EN 388:2016 Protective gloves against mechanical risks 3101X
•Level 3- Abrasion
•Level 1- Cut Resistance
•Level 0- Tear Resistance
•Level 1- Puncture
•Level X ISO 13997 Cut Resistance

• AlphaTec AQUADRI gloves are engineered with a unique moisture management technology that keeps hands dryer, for significantly longer periods of time.
• The design features a two-layered coating construction with a superior nitrile film for advanced chemical protection and an inner soft foam coating, making a difference especially when sweaty hands are a problem, resulting in an improved user comfort and performance.
•Patented AQUADRI technology brings a unique performance in moisture management that significantly reduces sweat build up inside the glove under hot & humid environments.
•High performance nitrile compound offers a far superior snag, puncture and abrasion protection compared with rubber or neoprene gloves
•Reverse lozenge palm finish for improved dry/wet grip
•Foldable cuff gutter to prevent dripping on the forearm
•Longer version than the 58-330 for further protection
• 380mm length
•Food safe
•EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKLOPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
•EN 388:2016 Protective gloves against mechanical risks 4101X
•Level 4- Abrasion
•Level 1- Cut Resistance
•Level 0- Tear Resistance
•Level 1- Puncture
•Level X ISO 13997 Cut Resistance

• Enhanced grip: Thanks to their ANSELL GRIP coating, AlphaTec 58-535B safety gloves minimize the force required to handle oily or wet components

• Elevated comfort: Their black acrylic inner liner improves comfort and facilitates outdoor application

• Advanced defences: AlphaTec 58-535B work gloves’ bonded construction, featuring a coating polymer that doesn’t penetrate the liner in manufacture, limits liquid and chemical leakage

• Improved durability: They also boast ANSI/EN compliant abrasion resistance

• Specialized protection: Beyond chemical resistance, they satisfy EN 407 contact heat level 1, further enhancing workplace safety

• Augmented dexterity: AlphaTec 58-535B PPE gloves’ lightweight 7-gauge design offers greater dexterity and flexibility

• Nitrile glove with acrylic black liner
• 13.4” (340mm) length
• EN 407 Protective gloves against thermal risks X1XXXX
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLOPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• Food safe
• EN 388:2016 Protective gloves against mechanical risks 3122A
• Level 3 Abrasion
• Level 1- Cut Resistance
• Level 2 Tear Resistance
• Level 2- Puncture
• Level A- ISO 13997 Cut Resistance

• Enhanced grip: Thanks to their ANSELL GRIP coating, AlphaTec 58-535W safety gloves
minimize the force required to handle oily or wet components

• Elevated comfort: Their white nylon inner liner enhances comfort and helps make them perfect for indoor applications

• Advanced defences: AlphaTec 58-535W work gloves’ bonded construction, featuring a coating polymer that doesn’t penetrate the liner in manufacture, limits liquid and chemical leakage

• Improved durability: They also boast ANSI/EN compliant abrasion resistance

• Specialized protection: Beyond chemical resistance, they satisfy EN 407 contact heat level 1, further enhancing workplace safety

• Nitrile glove with nylon white liner
• 13.4” (340mm) length
• EN 407 Protective gloves against thermal risks X1XXXX
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLOPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• Food safe
• EN 388:2016 Protective gloves against mechanical risks 3132A
• Level 3 Abrasion
• Level 1- Cut Resistance
• Level 3- Tear Resistance
• Level 2- Puncture
• Level A- ISO 13997 Cut Resistance

•Cut-protective chemical resistant glove with high visibility liner, for advanced
Protection

•Specialized protection: AlphaTec 58-735 chemical gloves’ nitrile barrier protects against common chemicals

•Enhanced features: The high-visibility inner liner indicates when the shell is compromised, warning users, while their foldable cuff can prevent chemicals running down the arm

•Heightened defences: AlphaTec 58-735 safety gloves’ INTERCEPT cut resistance knitwork ensures ANSI A3/EN ISO C cut protection

•Tightened grip: ANSELL GRIP nitrile shell treatment delivers better grip for handling both wet and oily components

•Optimized durability: AlphaTec 58-735 PPE gloves also achieve EN388:2016 Abrasion level 4 abrasion for longer wear

•Elevated comfort and dexterity: The liner’s integration into the nitrile shell ensures better fit, comfort and tactility

•Harm-free food handling: These AlphaTec gloves comply with EU and FDA food handing regulations, while Oeko-Tex Standard 100 approval certifies them free of substances considered harmful to human health
• 350mm length
• 18 Gauge
•EN 407 Protective gloves against thermal risks X1XXXX
•EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLMNOPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
•EN 388:2016 Protective gloves against mechanical risks 4X32C
•Level 4- Abrasion
•Level X- Cut Resistance
•Level 3- Tear Resistance
•Level 2- Puncture
•Level C ISO 13997 Cut Resistance

• First glove to combine outstanding flame resistance with high cut protection and ergonomic design
• Materials used in the glove are inherently flame resistant, even after washing
• Arc Flash Hazard/Risk Category 1•: helps protect workers against arc flash hazards
• Exclusive composite yarn provides exceptional cut resistance for safe handling of sharp objects and materials
• Soft foam coating to ensure great flexibility and a secure grip in a variety of environments
• Ergonomic design for superior comfort and reduced hand fatigue
• Anti-static according to EN1149
• Arc Flash NFPA 70E - Test Method/Standard: ASTM F2675-22 - Result: Hazard/Risk Category (HRC) 1
• Category III
• EN 407 Protective gloves against thermal risks 4.1.2.1.1.0
• EN388:2016 Protective gloves against mechanical risks 2X42C

Ideal applications
• Equipment assembly, replacing filters and parts
• Facility and machinery maintenance
• Pipe installation and repair
• Carpentry/Scaffolding
• Heavy duty metal handling
• Heavy equipment and vehicle maintenance
• De-energised electrical wiring & clean-up

• Ultralight, highly tactile food processing gloves, specially treated to reduce allergy risks
• Alphatec 87-195 safety gloves posses EU food handling certification
• Cotton-flocked lining, lessening perspiration and discomfort
• EN374 Type B chemical defences, protecting against mild acids, animal fats, oils, detergents and alcohols
• Super-thin composition ensures high levels of tactile sensitivity, for more precise handling.
• An ultra-lightweight design makes these Alphatec gloves dexterous and maneuverer
• Food safe
• Natural Rubber Latex
• 305mm length
• EN ISO 374-1:2016 Type B Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, KLT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• EN 421 Protective gloves against ionizing radiation and radioactive contamination
• EN 388:2016 Protective gloves against mechanical risks 1010X
• Abrasion- Level 1
• Cut Resistance- X
• Tear- 0
• Puncture- Level 1

• Natural rubber glove
• Good mechanical and chemical protection in heavy duty environments
• High resistance to certain water-based chemicals
• Good flexibility and elasticity reducing risk of tears
• Chlorinated to harden and easily cleanse the surface of the glove
• Beaded cuff for easy donning
• 1.5mm Thickness
• AQL 0.65
• 24 INCH (610mm) length
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AKLMPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• EN 388:2016 Protective gloves against mechanical risks 3121B
Abrasion- Level 3
Cut Resistance- Cut B
Tear- Level 2
Puncture- Level 1

• Natural rubber glove
• Good mechanical and chemical protection in heavy duty environments
• High resistance to certain water-based chemicals
• Good flexibility and elasticity reducing risk of tears
• Chlorinated to harden and easily cleanse the surface of the glove
• Beaded cuff for easy donning
• 1.2mm Thickness
• AQL 0.65
• 17 INCH (432mm) length
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AKLMPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• EN 388:2016 Protective gloves against mechanical risks 3121B
Abrasion- Level 3
Cut Resistance- Cut B
Tear- Level 2
Puncture- Level 1

• 7G Brushed polyester heavyweight knitted liner with Latex coated to palm area.
• Double dip to fingers for added protection.
• Vented back
• Highly visible fleese liner.
• Ideal for refrigeration, coldstore, and winter conditions.
• Thick latex coating for durability and grip.

• EN388: 2003
• Level 2 - Abrasion
• Level 2 - Cut Resistance
• Level 4 - Tear Resistance
• Level 1 - Puncture
• Conforms to EN511: 2006 1.4.X
• Conforms to EN407: 2004 X2XXXX

Features
• Electro conductive front finger tips for using touch devices
• Smart fit with durable synthetic leather base palm
• Original synthetic leather vintage puller
• Synthetic leather crotch
• Contrast yellow colour fourchettes and binding

Applications
• Multi-purpose
• Landscaping
• Forestry Lumberyards
• Cable and Wire work
• Maintenance and Repair
• Material Handling

EN388:2003
• Level 2 - Abrasion
• Level 1 - Cut Resistance
• Level 3 - Tear Resistance
• Level 2 - Puncture

• High quality soft grain leather.
• knitted cotton back.
• Hook and loop cuff fastening.

• EN388: 2003
• Level 2 - Abrasion
• Level 1 - Cut Resistance
• Level 1 - Tear Resistance
• Level 1 - Puncture

• High engineered nylon/Spandex yarn glove.
• Seamless liner.
• PU coating, palm coated.
• High quality cut resistance.
• Excellent dexterity.

• EN388: 2003
• Level 4 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level 3 - Puncture
• Level C - ISO 13997 Cut Resistance

• 100% Nylon seamless shell.
• Nitrile coated palm and fingers.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications

• EN388: 2016
• Level 3 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance

• High performance anti-vibration gloves
• Nylon/cotton knit with natural vulcanised palm and fingertips

• Abrasion resistance level 4
• Cut resistance level 1
• Tear resistance level 4
• Puncture resistance level 2

EN420.
EN388 4.1.4.2.
EN10819:

• PVC Gauntlet.
• 16" (40cm) overall length.
• Liquid proof.

• EN388: 2003
• Level 3 - Abrasion
• Level 1 - Cut Resistance
• Level 1 - Tear Resistance
• Level 1 - Puncture

• Highest needlestick resistance available provided by the layering of SuperFabric® brand material.
• Tested using 25 gauge hypodermic needles.
• Highest level of cut resistance on noted areas; EN388 Cut Level 5.
• Single glove needle solution with incredible dexterity and comfort.
• Wrinkle rubber palm coating with Actifresh anti-microbial treatment.

EN388 4.5.4.4 CE

• Highest needlestick and cut resistance available provided by the layering of SuperFabric brand material on noted enhanced areas, ANSI/ISEA Cut Level A9 and Needlestick Level 5
• 15-gauge hi-vis polyester shell enhances visibility and worker compliance
• SuperFabric® demonstrated injection resistance from apertures ranging from .002" to .012" (0.05 to 0.3 mm) using standard hydraulic
• Sandy nitrile three-quarter knuckle palm coating provides superior grip and abrasion resistance in wet conditions
• Knit wrist helps prevent dirt and debris from entering the glove
• Seamless construction allows enhanced comfort and breathability while maintaining dexterity and tactility

EN 388 4X3F
Needlestick Level 5

• Coreshield, 13 Gauge HPPE/basalt black liner, nitrile microfoam black coating
• Enhanced cut resistance, comfort, ease of selection
• The washability of the glove material means that even after 5 washing cycles, there are no significant changes in performance or size.
Together, these factors mean that CoreShield™ gloves have a longer life
• Hand and wrist protection
• Touch screen resisitve and capactivie
• All in one glove
• Coreshiled gloves are certified to STANDARD 100 by OEKA-TEX
• Conforms to EN 388 4X43C